134-1010-003

Mounting Feature:	--
Operating Temperature:	-55°C ~ 125°C
Insertion Loss:	--
Mating Cycles:	500
Dielectric Material:	Polytetrafluoroethylene (PTFE)
Center Contact Material:	Beryllium Copper
Body Finish:	--
Body Material:	Stainless Steel
Includes:	--
Features:	--
Center Contact Plating:	Gold
Ingress Protection:	--
Frequency - Max:	26.5GHz
Fastening Type:	Threaded, Threaded
Series:	--
Mounting Type:	Free Hanging (In-Line)
Style:	Straight
Impedance:	50 Ohm
Convert To (Adapter End):	SMA Plug, Male Pin
Convert From (Adapter End):	2.92mm (OS-2.9) Plug, Male Pin
Center Gender:	Male to Male
Adapter Series:	SMA to 2.92mm
Conversion Type:	Between Series
Adapter Type:	Plug to Plug
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

It is common knowledge that coaxial connectors are used to transfer high frequency signals between two electronic devices. In order to attain the highest possible electrical performance, there are a variety of types and designs of coaxial connectors available in the market. The 134-1010-003 adapter is a type of RF connector designed to interconnect two coaxial lines in order to provide an efficient means to transfer high frequency signals. This articles looks at the application and working principle of the 134-1010-003 RF connector.

Application of the 134-1010-003 Connector

The 134-1010-003 RF connector is an SMA type coaxial adapter, commonly used for the connection of 2.4 GHz wireless LANs and other wireless devices such as Bluetooth. Due to its smaller size compared to other similar RF connectors, the 134-1016-003 is also ideally suited for use in the embedded applications such as antennas, GPS receivers and other miniature wireless devices.The adapter is also used in fixed wireless networks such as point-to-multipoint (P2MP) networks, which require an antenna with a connection to an access point. The 134-1010-003 connector is designed to provide reliable communication between two points through the RF connector and can be used in both indoor and outdoor settings.

Working Principle of the 134-1010-003 Connector

The 134-1010-003 connector is a type of RF adapter that allows two coaxial cables to be connected in order to transmit a high frequency signal. The two cables contain an inner conductor that is made of solid or stranded copper and surrounded by a grounded shield, which is secured to the connector’s body. The connector’s body is then connected to the inner conductor through a slot, allowing the signal to pass through the line.The main function of the connector is to ensure that there is a low impedance between the two cables and to minimize any losses in the signal. In addition, it is also designed to reduce the possibility of signal interference between the two cables. The connector is capable of operating in the frequency range of 0-3GHz and is designed to provide a secure connection that is resistant to weather and corrosion.

Conclusion

The 134-1010-003 connector is an SMA type RF adapter that is designed for use in high frequency communications. It is used to connect two coaxial cables in order to transfer the signal between two electronic devices. The design of the connector ensures that any losses in the signal are minimized, and it is resistant to interference, weather and corrosion. The connector is most commonly used for the connection of wireless LANs, antennas, GPS receivers and other miniature wireless devices.

The specific data is subject to PDF, and the above content is for reference