134-1012-031

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial connectors (RF) - adapters are designed to connect different types of RF signal sources together. The 134-1012-031 is an adapter used to connect two coaxial plugs with different outer diameters, commonly referred to as a reducer or step-down adapter.

The 134-1012-031 has a male side that can receive a plug with inner diameter sizes of 1.35mm up to 1.48mm. It also has a female side that accommodates a plug with an inner diameter of 1.12mm. The adapter is not suitable for other applications where inner diameters greater than 1.48mm are present on either side.

A typical application for the 134-1012-031 is connecting a larger size coaxial cable to a smaller size coaxial cable. This may be necessary when connecting two pieces of equipment that have different specifications or when connecting a cable with a different inner diameter to a device with a smaller diameter.

The 134-1012-031 adapter is constructed for low-loss transmission and is capable of handling high frequency signals. The adapter is composed of a silver-plated coaxial body, a center contact and a sealing sleeve. The internal components of the adapter are precision machined to provide a conductive electrical path.

The body of the 134-1012-031 is made of nickel-plated brass and consists of a cup and a hollow center. The cup is designed to retain the connection in place and the center is drilled for the insertion of the center pin. The center pin is also made of silver-plated brass and is designed to make contact with the RF signal source.

The sealing sleeve of the 134-1012-031 is made of nickel-plated brass and is designed to provide additional stability in the connection. It also provides a barrier to reduce electrical noise produced by the signal.

The working principle of the 134-1012-031 adapter is relatively simple. It relies on the conductive properties of the silver plated contacts and the sealing sleeve to create an airtight connection between the two coaxial plugs. When properly connected, the electrical forces on the two plugs interact causing them to form a good electrical circuit.

In conclusion, the 134-1012-031 is a common adapter used to connect two coaxial plugs with different outer diameters. It is made of highly conductive materials and provides low-loss transmission of RF signals. The adapter creates a connection by relying on the conductive properties of the silver contacts and the sealing sleeve to form an airtight connection.

The specific data is subject to PDF, and the above content is for reference