1393657-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Backplane connectors are interface connectors that connect multiple printed circuit boards (PCBs) to each other and provide a path for signal transmission. They can be applied to a wide range of applications, from computer servers and networking equipment to telecom and medical devices. They are usually designed to allow for reliable electrical connection and can also provide mechanical modules such as guide pins and mounting holes.

The DIN 41612 is one of the most widely used types of backplane connectors, and is a widely recognized standard for backplane and connector designs. It is a type of parallel interconnection between multiple circuit boards and can be divided into two categories: the slip-in type and the press-in type. It is mainly used in applications such as telecommunication, military aerospace systems, medical electronics, industrial automation, and instrumentation.

The slip-in type backplane connector is a pluggable type of connector and is mainly used in data communication, telecommunication, and computer systems. This type of connector consists of an array of contacts in a single row of positions on a plastic housing. It is a low-cost solution for dense applications and requires no soldering. It also does not require a separate housing and can therefore be mounted directly onto the backplane board.

The press-in type backplane connector is used mainly in large electronic systems and requires the use of a seperate housing. It offers higher contact density than the slip-in type and uses stamped (or sometimes machined) metal contact pins. The pins are press-fit into the plastic housing at the time of assembly. It is a more expensive solution, but it offers greater reliability, especially in high-temperature applications.

In applications requiring a higher level of density, such as military aerospace systems and telecom networks, the DIN 41612 is often used in conjunction with high-density backplane connectors, such as the LP-DIMM (Long-Pitch Dual In-line Memory module) or the MP-DIMM (Multi-Pitch Dual In-line Memory Module). These types of connectors are designed to provide greater signal density than traditional connectors, while still providing reliable electrical connection.

The working principle of the DIN 41612 is relatively simple. The contacts of the connector are connected to the metal contacts on the backplane board by a soldering or crimping technique. When the connector is inserted into the board, the contact pins of the connector press against the contact pads on the board, ensuring a secure connection. The contact pins are then locked into place using a retention mechanism that prevents the connector from being inadvertently removed.

In conclusion, the DIN 41612 is one of the most widely used types of backplane connectors and is used in a wide range of applications, from computer servers and networking equipment to military aerospace and telecom systems. It is relatively easy to use and offers a high degree of reliability. The press-in type backplane connector is the more expensive solution, but provides a more reliable electrical connection in high-temperature applications.

The specific data is subject to PDF, and the above content is for reference