1393813-8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Signal relays are electromechanical devices that connect or disconnect circuits depending on the voltage or current in another circuit. A number of applications benefit from signal relays, including energy conversion, sensing and control, timing and logic. Among signal relays, 1393813-8 signal relays are suitable for switching low current during medium to long range operations, up to 2 Amps.

The 1393813-8 signal relay offers a wide range of features that makes it suitable for many applications. The Low-Saturation Voltage (LSV) from 0.3 volts to 0.5 volts makes the relay suitable for batteries and other low-voltage applications. The Low-Current Consumption (LCC) and High-Current Capacity (HCC) provide variations in current capacity to suit the needs of different applications. And the normally open design enables the 1393813-8 signal relay switch from its open to its closed state without any external control. The 1393813-8 signal relay also has a wide range of operating temperatures, from -45°C to 85°C, and contact resistance as low as 25 mΩ.

Due to its low power consumption, wide operating temperature and various current capacities, the 1393813-8 signal relay can be used in various applications such as motor controls, audio and video equipment, and telecommunications equipment. In motor controls, the signal relay is used for switching current to the mains of the motor, and the voltage passing to the commutation connection can be set by adjusting the contacts. This ensures that the motor runs in the most efficient manner possible.

In audio and video equipment, the 1393813-8 signal relays can be used to provide redundant control of the circuit for regulating signals or power supply. This increases the reliability of the audio/video apparatus. Finally, in telecommunications equipment, the signal relay is used in the switching system where some control of signals is needed. The low power consumption and wide operating temperature makes it a suitable choice.

The working principle of the 1393813-8 signal relay is quite simple. The relay consists of two contact points, commonly referred to as the NC (normally closed) and NO (normally open) contacts. When electricity flows through the signal relay, the NC contact closes and the NO contact opens. This allows for the flow of electricity from one circuit to another, thereby completing the circuit. If the voltage or current of the other circuit changes, then the NO and NC contacts of the relay open and close respectively, thereby adjusting the signal.

The specific data is subject to PDF, and the above content is for reference