141-0404-012 Connectors, Interconnects

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF) are used in the transmission of radio-frequency (RF) signals from one device to another or from one point in a system to another. There are many varieties of RF connectors, but the most commonly used are the 141-0404-012 Coaxial Connectors.

The 141-0404-012 Coaxial Connectors are typically used in the transmission of low-level signals such as audio, digital signals, and radio-frequency signals. They are used in a variety of applications, such as in antennas, handheld radios, two-way radios, mobile phones, and more.

Application Field:

The 141-0404-012 Coaxial Connectors are available in a variety of configurations, with the most popular being the "locally mounted" and the "remotely mounted" types. Locally mounted connectors are the most common type, and are usually used in low-level antenna and radio installations. Remotely mounted connectors are typically used when higher frequencies are required, or when the antenna is positioned in a remote location, such as on a tower or pole.

The 141-0404-012 Coaxial Connectors are used in a range of applications, including: radio broadcast systems; two-way radios; TV transmitters and receivers; cable television and internet systems; radar systems; cellular communications systems; and RF and microwave circuits. They are also used for military and private satellite communications.

Working Principle:

The 141-0404-012 Coaxial Connectors use a coaxial cable, which is a single-data cable made up of two concentric conductors, with one inside the other. The inner conductor typically consists of a thin metal wire, while the outer conductor is usually a woven metal sleeve. This design creates an impedance that prevents interference and allows the transmission of signals with low levels of distortion.

The 141-0404-012 Coaxial Connectors are designed to terminate the coaxial cable and connect it to a device. There are two parts to the connector: the male connector, which fits into the female connector; and the female connector, which is placed onto the other device. The metal pins of the male connector plug into the female connector, which ensures a secure connection.

When installing a 141-0404-012 Coaxial Connector, the cable must be cut to the correct length and then the connectors must be crimped onto it. This ensures that there is a good electrical connection between the cable and the connector. The connector must also be properly sealed, using waterproof tape to ensure that it is protected from dust and moisture.

The 141-0404-012 Coaxial Connectors are designed for low-level signal transmission in an efficient and secure manner. They are used in a variety of applications, from small handheld radios to TV transmitters and receivers, as well as in telecommunications, radar, and satellite systems. With their small size and reliable performance, they provide a reliable connection in the most demanding environments.

The specific data is subject to PDF, and the above content is for reference