
Allicdata Part #: | J997-ND |
Manufacturer Part#: |
141-3901-810 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Johnson |
Short Description: | ATTENUATOR SMA SS 2W 10DB 0-6GHZ |
More Detail: | RF Attenuator 10dB ±0.5dB 0Hz ~ 6GHz 50 Ohms 2W SM... |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bag |
Part Status: | Obsolete |
Attenuation Value: | 10dB |
Frequency Range: | 0Hz ~ 6GHz |
Power (Watts): | 2W |
Impedance: | 50 Ohms |
Package / Case: | SMA In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are resistive devices that provide a specific amount of power or voltage reduction for an electronic signal. Specifically, the 141-3901-810 attenuator is a high power resistive device that is used in power and RF applications, providing up to 10x power reduction. By providing adjustable resistance, 141-3901-810 attenuators can be used to match a signal to an amplifier or to minimize power consumed by a device. In addition, 141-3901-810 attenuators are used in high-power applications to reduce voltage distortion.
The main application of the 141-3901-810 attenuator is to reduce power or voltage in high-power electronic systems. It is commonly used in RF applications where signal strength may need to be adjusted to avoid distortion or overloading an amplifier. Additionally, this attenuator is used in power systems where power efficiency is important or voltage reduction is required to prevent power losses.
The working principle of the 141-3901-810 attenuator is based on a resistive network where adjustable resistors are used to reduce the power or voltage of an incoming signal. This resistive network is connected between two terminals and can be adjusted by varying the resistance of the resistors in the network. This adjustable resistor network is able to effectively reduce both power and voltage, depending on the incoming signal levels.
The 141-3901-810 attenuator is designed to minimize power losses while providing an adjustable range of power reductions. This makes the attenuator suitable for a variety of high-power applications such as RF and power systems. This high power attenuator also features a wide frequency range, making it suitable for a variety of frequency-dependent loads. Furthermore, the 141-3901-810 attenuator is designed to be rugged and reliable, allowing for long-term operation with minimal maintenance.
The 141-3901-810 attenuator is an effective device for reducing power and voltage levels in high-power applications. Its adjustable resistance network allows the user to match a signal to an amplifier or minimize power consumption by a device. Additionally, the attenuator is designed to be rugged and reliable, making it suitable for long-term operation with minimal maintenance. The 141-3901-810 is a reliable device that can be used in a variety of power and RF applications to provide power or voltage reductions with minimal power losses.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...

RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...

RF ATTENUATOR 1DB SMA MODULERF Attenuato...

RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...

RF ATTENUATOR 6DB 50OHM SMARF Attenuator...

RF ATTENUATOR 7DB SMA MODULERF Attenuato...
