1410-G110-L2F1-S01-1A

The 1410-G110-L2F1 Series Circuit Breaker is a member of the G Series from Chint, a company that develops and manufactures electrical components, system solutions and services. This circuit breaker is designed for the protection of distributors and loads in industrial, commercial and domestic panels up to 32 A and up to 4,000 V AC. It is also suitable for use in distribution and control panels with load currents greater than 5A.

To serve as an effective protection device, the 1410-G110-L2F1 circuit breaker must ensure the safety of all electrical circuits and components by protecting them from overcurrent and overload conditions. This is done through the opening and closing of electrical contacts when an overload or short circuit occurs. The circuit breaker is designed to be able to open or close the circuit in a short period of time, thus preventing damage to the equipment or wires within the circuit.

The 1410-G110-L2F1 circuit breaker is one of the most advanced types of circuit breaker available. It is designed to securly protect against short circuits and overloads up to 50 kA. It also has an automatic reset feature, which allows the circuit breaker to reset automatically after an overload or short circuit condition has been cleared, thus removing the need for manual resetting or recycling.

The 1410-G110-L2F1 circuit breaker has a variety of applications, including protection of: motors, air conditioners, oil pumps, transformers, compressors, refrigerators, photocopiers, and other high-load electrical equipment. It can also be used in switched-mode power supplies and other applications.  The advanced circuit breaker also provides protection against overvoltage, undervoltage, and reverse-polarity conditions.

In terms of working principle, the 1410-G110-L2F1 uses a thermal-magnetic protection system that instantly responds to both overcurrent and overload conditions. There are two main components of the thermal-magnetic system: heat release element and a magnetic trip unit. The heat release element is responsible for detecting high current levels in the circuit, while the magnetic trip unit is responsible for disconnecting the circuit once an overload or short circuit is detected. If the overload persists for too long, the heat release element will cause the breaker to trip and disconnect the circuit, thus preventing damage to the circuit and components.

The 1410-G110-L2F1 circuit breaker is designed to be easy to install and maintain. It is provided with a standard panel-mounting bracket, while optional surface mounting is also available. Additionally, the circuit breaker is equipped with a multi-position handle that allows for easy switching between the ON and OFF positions. In terms of maintenance, the circuit breaker can be easily tested through the use of a test button, with no need to remove any panels or wires.

In conclusion, the 1410-G110-L2F1 Series Circuit Breaker is a reliable and advanced device that ensures the safety of circuits and components from overcurrent and overload conditions. It has a variety of applications, from the protection of motors, air conditioners, and other equipment to switched-mode power supplies. This circuit breaker is easy to install and maintain, and utilizes a thermal-magnetic protection system to respond instantly to both overcurrent and overload conditions. With its advanced features and reliable protection, the 1410-G110-L2F1 Circuit Breaker is an excellent choice for any commercial or residential application.