1410-G110-P2F1-S01-1.5A

Series:	1410-G1
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Thermal
Moisture Sensitivity Level (MSL):	--
Current Rating:	1.5A
Voltage Rating - AC:	250V
Voltage Rating - DC:	50V
Number of Poles:	1
Actuator Type:	Push to Reset
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Circuit breakers are designed to detect fault currents and open a circuit when a fault current is detected. The 1410-G110-P2F1-S01-1.5A circuit breaker is a high-performance, medium-duty breaker with a rating of 1.5A. It is designed to protect industrial or commercial applications from overloads, surges, and short circuits.

Operation and Characteristics

The 1410-G110-P2F1-S01-1.5A is a thermal-magnetic type circuit breaker with a rating of 1.5A. It is designed for use in 50/60Hz AC circuits with a voltage rating of up to 440V. The trip characteristics are adjustable; the current setting can be adjusted from 1 to 11 times the rated current of the breaker. The breaker has a short-time current rating of 30 times its rated current, and a short-circuit current rating of 3000A.The breaker has a temperature- and time-dependent trip characteristic, which ensures that it will trip at the correct current and not prematurely open in the event of a transient surge. It also has an adjustable overcurrent trip point, allowing it to be set to trip at higher than its rated current.

Application Field and Working Principle

The 1410-G110-P2F1-S01-1.5A is designed for use in a variety of industrial and commercial applications where protection from overcurrents and short circuits is required. It can be used in panel Mounting applications, motor control, and in HVAC systems.The operating principle of the 1410-G110-P2F1-S01-1.5A circuit breaker is based on the thermal-magnetic principle. The breaker contains two sets of contacts – one set magnetic, and one set thermal. The magnetic contacts, which are connected to a trip coil, act as an overcurrent protection device; when the current passing through the circuit exceeds the rated current of the breaker, the coil is energized, pulling the magnetic contacts apart and opening the circuit.The thermal contacts, on the other hand, act as a short-circuit protection device. When a short circuit occurs, a large surge of current passes through the circuit. This causes the thermal contacts to heat up, eventually reaching a temperature where they will open the circuit, thus breaking the short circuit and protecting the circuit from further damage.

Conclusion

The 1410-G110-P2F1-S01-1.5A circuit breaker is a versatile, rugged, and reliable medium-duty breaker with a high current rating. It is designed for use in industrial and commercial applications where protection from overloads, surges, and short circuits is required. The breaker operates on the thermal-magnetic principle, incorporating two sets of contacts to protect the circuit from overcurrents and short circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description