142-0694-011

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 142-0694-011 coaxial connector is a type of RF connector, which is designed to work in high-frequency applications, such as in radio and television broadcast frequencies. The connector is a high-performance, cost-effective alternative to traditional 50 ohm series and has the ability to handle higher frequencies of up to 500 MHz.

The 142-0694-011 uses a standard 50-ohm impedance. This type of coaxial connector provides a secure connection between two pieces of equipment. The connector consists of an inner conductor, which is usually made of copper and is encased in insulation. The inner conductor is surrounded by a second conductor, usually a sheet of metal, called the outer conductor. The two conductors are separated by an air gap, which provides electrical isolation. The connector also has a dielectric material between the inner and outer conductors, which helps reduce the loss of signal in the transmission.

The working principle of the 142-0694-011 coaxial connector relies on a combination of physical contact and electrical conduction. The physical contact between the inner and outer conductors is secured by a mechanism called a locking pin, which provides a tight grip on the connector. The electrical conduction is achieved through the use of two electrical contacts, which are located at the center of the inner conductor and at the end of the outer conductor.

The 142-0694-011 is commonly used in high-frequency applications such as satellite communication systems, radio and television broadcasting, cable modem data signals, and even Automatic Meter Reading systems (AMR). The design of the connector makes it suitable for use in a wide range of applications because its low-loss characteristics allow it to handle higher frequencies without signal loss.

The 142-0694-011 is also easy to install and requires no special tools. It uses standard crimping tools to fasten it onto the cable, and the locking pin makes it easy to securely attach it to the desired piece of equipment. The connector is designed with reliability in mind, and it can withstand long-term use and environmental conditions such as temperature variations, humidity and corrosion.

In summary, the 142-0694-011 is a type of RF connector designed for high-frequency applications, such as radio and television broadcasting, satellite communication, and cable modem data signals. It has a standard 50-ohm impedance and uses a locking pin to provide a secure physical connection between two pieces of equipment. It provides a low-loss connection and is easy to install, with no special tools required. The 142-0694-011 provides a reliable connection that stands up to harsh environmental conditions, making it a cost-effective and efficient option for many applications.

The specific data is subject to PDF, and the above content is for reference