142-4403-006

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial connectors (RF) are used to connect two or more pieces of equipment with an electrical signal or signal path. They come in many different shapes and sizes, but all types are designed to meet the specific needs of the applications they are used in. The 142-4403-006 is a commonly used device, which allows a good signal transmission without an excessive amount of crosstalk.

The 142-4403-006 is a type of RF coaxial connector. This device has two elements: a center contact and an outer dielectric. The dielectric is a non-conductive material such as rubber or plastic, which serves to insulate the connector. The center contact is a metal conductor typically made of brass that creates the electrical connection between the two pieces of equipment. The center contact should be of the highest quality, as it is responsible for providing a low-loss, high-quality signal path.

The primary purpose of using the 142-4403-006 is to reduce the amount of crosstalk. Crosstalk occurs when a signal from one conductor is picked up by another conductor. The amount of crosstalk between two conductors is measured by the amount of power the signal is able to pick up. The 142-4403-006 eliminates crosstalk by providing a guarded path, as the metal center contact and the dielectric material ensure that only the signal meant to be transmitted is able to be picked up.

The 142-4403-006 is commonly used in many different applications, including the transmission of data, audio, and video signals. They are often found in the audio/video industry, consumer electronics, and broadcast equipment. These connectors are used for their reliability, low-cost, and ease of installation. They are also frequently found in high-definition video and cable television setups, as they provide a secure connection that prevents signal loss.

The working principle of the 142-4403-006 is relatively straightforward. The center contact serves as a point of connection between two pieces of electronics, while the dielectric material provides insulation and reduces crosstalk. This device requires very little power to operate and is a highly reliable method of transmitting signals and communications.

The 142-4403-006 is one of the most commonly used types of RF connectors. Its low-cost and reliable connection make it an invaluable part of many electronic applications. Its ability to reduce crosstalk and provide reliable signal transmission also makes it an ideal choice for use in a variety of industries.

The specific data is subject to PDF, and the above content is for reference