142-4408-006

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF)

Coaxial connectors are used widely in electronic circuits and systems. The majority of these connectors are designed for radio frequency (RF) transmission. The 142-4408-006 coaxial connector is used for RF applications and the following will explain its application field and working principle.

Application Field

142-4408-006 coaxial connectors are designed for low frequency applications in the range of 0.5GHz to 3.0GHz. These types of connectors are used in many applications such as for cordless phone base stations, Wi-Fi access points, microwave systems and fiber optics. Coaxial connectors are also widely used in commercial and consumer electronics, military, space, and communications systems. This type of connector is robust, secure and has a low signal loss making it ideal for RF applications.

Working Principle

The 142-4408-006 coaxial connector consists of two parts, the plug and the jack. The plug is inserted into the jack and the pins in each part make contact and provide an electrical link between the two components. The connection between the two parts is enabled by a pin and ring system consisting of an inner metal cylinder surrounded by a conductive metal sleeve which is often referred to as shielding. The pin and ring system allows the signal to be transmitted from one part to the other with minimal interference or noise.

The plug and jack also provide both electrical and mechanical connections between the two parts. This is done by a mechanism known as the "pocket - nut". This mechanism securely locks the plug to the jack eliminating any mechanical interference or unwanted twisting. The locking nut also ensures an electromagnetic shielding, providing an extra layer of insulation to the coaxial connection.

RF Test

In order to confirm that the 142-4408-006 is suitable for low frequency RF purposes, a set of tests must be performed to check the frequency response and the return loss of the connector. Frequency response tests measure the amount of attenuation in the signal at various frequencies. The connector must provide low levels of attenuation at low frequencies for the signal to be transmitted effectively. The return loss tests measure the amount of power reflected when the signal is sent through the connector. High levels of reflected power indicate that the connector is not suitable for RF applications.

These tests are conducted in a laboratory environment and the results are compared to the specifications of the connector. The results of the tests must meet the specified requirements for the connector to be approved for RF applications.

Conclusion

The 142-4408-006 is a coaxial connector designed for low frequency RF applications. It consists of a plug and a jack that provide both electrical and mechanical connections between the two components. The plug and jack have a pocket - nut mechanism that securely locks the plug in place and provides an extra layer of insulation. The connector must undergo a set of tests in order to be approved for RF applications and the results of the tests must meet the specified requirements.

The specific data is subject to PDF, and the above content is for reference