142278

Series:	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Connector Style:	--
Moisture Sensitivity Level (MSL):	--
Connector Type:	--
Mounting Type:	Panel Mount, Square Flange
Body Finish:	Nickel
Contact Material:	--
Contact Finish:	--
Features:	--
Body Material:	Brass
Dielectric Material:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF) - Terminators

Coaxial connectors, also known as RF (Radio Frequency) connectors, are devices used to transmit radio frequency signals in order to enable two or more pieces of equipment to communicate with each other. Terminators, which are an integral part of these types of connectors, provide a means of controlling the amount of power being transmitted and, at the same time, controlling the amount of radio frequency noise which is produced.A coaxial connector is composed of two primary parts – an outer ‘shell’ and inner core. The shell is usually comprised of a plastic or metal material which is designed to protect the inner core from the environment. The core, being the ‘active’ part of the connector, connects a signal line to a device such as an electronic component. Terminators are used to ensure proper connection between the core and the device, providing the best possible signal transmission.The terminator is an integral part of the coaxial connector. It is designed to maintain the impedance of the cable and the connector at a constant level, thus allowing a consistent and predictable signal levels. The terminator is also used to reduce the amount of electrical energy which is transmitted through the connector and reduce the amount of RF noise generated by the system.Different connection types require different types of terminators. The most common types of terminators are 50 ohm and 75 ohm, although there are other types available. Terminators are used to maintain the impedance of the cable and the connector at a constant level so that the signal level which is transmitted is consistent and predictable. They also reduce the amount of electric energy which is transmitted and reduce the amount of RF noise which is produced.The terminators can be configured in a variety of ways depending upon the application. For example, they can be used to provide a source impedance when connecting to a transmitter or a load impedance when connecting to a receiver. Additionally, terminators are available in a variety of power configurations, such as Constant Impedance, High Power, Low Power, and Current Controlled configurations.In addition to providing a consistent signal level, the terminator also helps to prevent reflections which can be caused by an impedance mismatch. Reflections are not good as they can interfere with the operation of the system and can cause the signal to become weak or distorted. By using a terminator, which matches the impedance of the cable or connector, the reflection is minimized and the signal strength is maximized.The different types of terminators are designed to provide different levels of current, based on the application. High power terminators are designed to carry a higher current while low power terminators are used to carry a lower current. Current controlled terminators are used when the exact current can be measured and controlled.In conclusion, coaxial connectors are essential in the operation of radio frequency systems. Terminators provide a means of controlling the amount of power being transmitted and also controlling the amount of radio frequency noise which is produced. The terminator is configured in a variety of ways depending on the application and is designed to provide a consistent signal level with minimal reflections. With the right type of terminator, the system can have consistent, reliable performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description