14R-CBSA-0.5X1.0X0.13

Series:	--
Packaging:	Bulk
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.130" (3.30mm)
Length - Overall:	1.000" (25.40mm)
Width - Overall:	0.500" (12.70mm)
Ventilation:	Non-Vented
Mounting Type:	Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Shields protect equipment from the negative impacts of RF radiation, electromagnetic interference (EMI), and electromagnetic pulse (EMP). They are used to protect electronic equipment and systems from interference and reduce the transmission of interfering signals. RF Shields are manufactured from a variety of materials, depending on the intended application. The 14R-CBSA-0.5X1.0X0.13 is a type of RF Shield that is most commonly used in telecommunications and audio equipment.The 14R-CBSA-0.5X1.0X0.13 is composed of three layers of tin-plated steel. The outermost layer is a thin layer that is applied over the inner layers. This outer layer is highly conductive, and acts as a Faraday Cage, meaning that it reflects incoming RF signals away from the protected equipment. The interior layers of the RF Shield form an inner cavity that is sealed to create a barrier between the RF radiation and the protected equipment.The 14R-CBSA-0.5X1.0X0.13 RF Shield is typically used in applications that require extremely low levels of interference, such as frequency division multiple access (FDMA) systems, in which several communication frequencies must not interfere with each other. The shield is also used in high-power radio frequency applications, where the shield must be able to absorb and block large amounts of energy. The 14R-CBSA-0.5X1.0X0.13 also provides EMI shielding from emissions that can be generated from close-range equipment.RF Shields like the 14R-CBSA-0.5X1.0X0.13 provide a wide range of benefits. They can block RF signals, significantly reducing the noise and interference generated from radio frequencies. The shielding is also effective in reducing power and data losses that result from EMI and EMP. Additionally, RF Shields act as a physical barrier against dust, moisture, and other environmental contaminants.The RF Shielding of the 14R-CBSA-0.5X1.0X0.13 is designed to reduce the transmission of interfering signals, while still allowing signals to pass through. To ensure this, the shield includes several layers of thin steel that are designed to absorb and attenuate the incoming signals. This RF Shield also features an inner cavity that is designed to prevent RF radiation from entering the cavity. This inner cavity acts as a Faraday cage and blocks any incoming signals from entering the cavity.The 14R-CBSA-0.5X1.0X0.13 RF Shield is a versatile shield that is used in a wide range of electronic equipment and systems. It provides excellent protection against RF radiation, EMI, and EMP, and is typically used in applications that require protection from high-frequency radio noise. Additionally, this shield is highly effective in reducing power and data losses that can occur from RF interference.

The specific data is subject to PDF, and the above content is for reference