14R-CBSF-2.0X2.0

Series:	10-CBS
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.130" (3.30mm)
Length - Overall:	2.000" (50.80mm)
Width - Overall:	2.000" (50.80mm)
Ventilation:	Vent Holes in Pattern
Mounting Type:	Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Shields and 14R-CBSF-2.0X2.0 Application Field and Working Principle

RF shields are electro-mechanical devices used to protect sensitive electronics and electronic components from potential interference caused by electromagnetic fields. They are designed to absorb or attenuate electromagnetic energy in order to prevent the development of unstable electrical conditions that can potentially affect the operation of a wide variety of electronic devices. One such type of shielding device is the 14R-CBSF-2.0X2.0, which is a special purpose shield designed to protect critical electronic circuits operating at high frequencies. The 14R-CBSF-2.0X2.0 is a metallic shield designed to dampen and absorb electromagnetic waves. It consists of a flat metallic sheet with a series of holes and slots cut into it along the edge, forming a rectangular shape with an open top. It is designed to be placed around an electronic circuit in order to "create a Faraday Cage" that prevents the passage of electromagnetic energy. The 14R-CBSF-2.0X2.0 is generally used to protect a circuit against interference from radio frequency (RF) sources, such as radio and TV transmitters and mobile phone towers. It is also often used in industrial applications where high frequency electrical signals need to be kept away from sensitive electronics. This shield can also be used in medical applications where X-ray radiation or microwaves may be present.When placing the 14R-CBSF-2.0X2.0 around an electronic circuit, it should be placed in a way that the opened sides of the sheet face the direction of the incoming electromagnetic energy. This ensures that the most amount of energy is scattered and dissipated away from the protected electronics. The holes and slots in the shield also act as reflectors, directing energy away from the protected components.The effectiveness of the 14R-CBSF-2.0X2.0 is due to its unique properties and its ability to absorb and reflect electromagnetic energy. The inside of the shield acts as an absorber, absorbing electrons from the incoming signal. The slots and holes reflect incoming radiation away from the circuit, and the outer surface acts as a dissipator, allowing the energy to pass through without entering the protected electronics.The 14R-CBSF-2.0X2.0 is an effective shielding device for a wide variety of applications. It is often used in industrial and medical applications to protect critical electrical and electronic components from the potential hazards associated with electromagnetic interference. In addition, it is also used in consumer electronics to protect against interference from transmitters and other RF sources.

The specific data is subject to PDF, and the above content is for reference