
Allicdata Part #: | 150-50TG-ND |
Manufacturer Part#: |
150-50TG |
Price: | $ 8.37 |
Product Category: | RF/IF and RFID |
Manufacturer: | |
Short Description: | FLANGED RES THICK FILM 5% |
More Detail: | RF Attenuator 0Hz ~ 2GHz 50 Ohms 150W |
DataSheet: | ![]() |
Quantity: | 1000 |
50 +: | $ 7.60725 |
Series: | -- |
Packaging: | Tray |
Part Status: | Active |
Attenuation Value: | -- |
Frequency Range: | 0Hz ~ 2GHz |
Power (Watts): | 150W |
Impedance: | 50 Ohms |
Package / Case: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators
150-50TG application field and working principle
Attenuators are devices used to reduce the power of an electrical signal. The most common attenuators are in radio frequencies, but many other types are available. The 150-50TG is an attenuator specifically designed for use in high-frequency applications, such as radio, radar, and television. The device is composed of three parts: a transmission line, a controller, and a termination load. The transmission line is a coaxial cable, which carries the signal from the transmitting device to the attenuator. The controller is a variable resistance element that provides a method for manipulating the signal. Finally, the termination load is used to terminate the signal, reducing the power of the signal to the desired level.
In operation, the signal passes through the transmission line, and is manipulated by the controller. The controller runs the signal through a variable resistor, which adjusts the amount of power that is allowed to pass through. The signal then passes through the termination load, which reduces the signal to the desired level. The termination load is often a resistive load, although other types, such as reactive matching networks, can also be used.
The 150-50TG attenuator is ideally suited for use in high-frequency applications, where the signal levels must be carefully controlled. The device is also highly reliable, with a long useful life. The attenuator can be used in both static and dynamic systems, and is designed to withstand the harsh conditions often encountered in high-frequency direct-current and radio-frequency applications.
The 150-50TG is designed with both ease of use and cost-efficiency in mind. The device is easy to install and requires minimal maintenance. Additionally, the 150-50TG is highly reliable, with a long service life. The attenuator is cost-effective, and can provide excellent results when used in the right application.
In conclusion, the 150-50TG attenuator is a reliable and cost-efficient device for use in high-frequency applications. The device is composed of three main parts, and can be used in both static and dynamic systems. The 150-50TG is easy to install and requires minimal maintenance, making it ideal for use in even the harshest of environments. Additionally, the device is highly reliable, with a long service life, and can provide excellent results when used in the right application.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...

RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...

RF ATTENUATOR 1DB SMA MODULERF Attenuato...

RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...

RF ATTENUATOR 6DB 50OHM SMARF Attenuator...

RF ATTENUATOR 7DB SMA MODULERF Attenuato...
