160-103GS

Inductors are the passive electronic components used in a variety of circuits. They are used to create inductance and store inductive current to pass the energy through a circuit. The best way to understand the purpose of any inductor is to think of it as a means to behave like an electrical spring, which stores energy when electrical current passes through it. In fact, the amount of stored energy is proportional to the current passing through it.

The 160-103GS fixed inductor is a type of inductor used in many electronics applications, such as RF circuits, power converters, inductive charging, and switching mode power supplies. This particular inductor is capable of handling currents up to 10 amps and providing inductance values between 10 μH and 300 μH. It is constructed from a high quality thick film ceramic combustible substrate.

The principle of operation for the 160-103GS fixed inductor is based on Faraday\'s Law of Induction. This law states that when a current passes through a conductor, an electromagnetic field is generated around the conductor, inducing a tension in a conductor in the vicinity of it. The induced tension is then proportional to the rate of change of the current, hence, higher frequencies will induce higher voltages in an inductor.

The 160-103GS fixed inductor takes advantage of this principle by winding a few thin conductive wires into a high quality ceramic combustible substrate. The inductance created is then proportional to the number of turns and the cross-sectional area of the conductor. By controlling the number of turns and the cross-sectional area, the 160-103GS can be tuned to produce specific frequencies.

The 160-103GS fixed inductor is used in a variety of electronic applications. It is used as a noise filter in RF circuit to reduce or eliminate interference caused by external frequencies, and also serves to limit power in switching mode power supplies to prevent damage. The 160-103GS is also used in inductive charging applications, where it provides a low resistance path for current to flow.

Overall, the 160-103GS fixed inductor is a high quality component that is used in many electronic applications, ranging from RF to power converters. Its operation is based on Faraday’s Law of Induction, and takes advantage of the production of an electromagnetic field generated from the passage of current. Its use as a noise filter, power limiter, and in inductive charging applications has enabled engineers to create efficient designs for their products.