160-822FS

DC Resistance (DCR):	2.4 Ohm Max
Height - Seated (Max):	0.080" (2.03mm)
Size / Dimension:	0.150" L x 0.120" W (3.81mm x 3.05mm)
Supplier Device Package:	--
Package / Case:	2-SMD
Mounting Type:	Surface Mount
Inductance Frequency - Test:	7.9MHz
Operating Temperature:	-55°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	30MHz
Q @ Freq:	40 @ 7.9MHz
Series:	160
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	230mA
Tolerance:	±1%
Inductance:	8.2µH
Material - Core:	Iron
Type:	--
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Fixed inductors are electronic devices that store energy in an electric field. These devices are characterized by their inductance, which is the ratio of the stored energy to the current necessary to achieve it. 160-822FS is a type of fixed inductor used in many applications. This article will discuss the application field and working principle of the 160-822FS.

Applications field

The 160-822FS is typically used in power electronics applications such as motor controllers, motor drives, and power supplies. These applications require a stable current, and the 160-822FS is able to provide this by delivering a predictable amount of energy for a certain current. The 160-822FS is a reliable device for these applications because it has a high inductance and low resistance, which results in a smaller power loss. Additionally, the 160-822FS has a lower drift than other types of fixed inductors, making for a more reliable device.The 160-822FS is also commonly used in automotive applications, where constant current is needed to ensure proper operation. The 160-822FS is used in a variety of automotive applications, including engine control, steering systems, and airbag systems. Additionally, the device is used in vehicle audio systems, where the inductor is necessary for maintaining audio signal integrity.

Working Principle

The 160-822FS is a switched mode power source that uses inductive energy storage to convert energy for different applications. It works by increasing the voltage level of the input signal to match a desired output voltage level. The device is able to do this by relying on the relationship between the inductance of an inductor and the current passing through it.When current passes through an inductor, a magnetic field is created. This field is proportional to the current passing through it. When the current increases, the magnetic field also increases, and vice versa. This relationship is governed by Faraday\'s law of induction, which states that the induced electromotive force (EMF) is equal to the rate of change of the magnetic flux.The 160-822FS takes advantage of this law and is able to convert energy at a certain voltage level. When the input voltage is lower than the desired output voltage, the device will increase the current to create a greater EMF, which can then be used to raise the output voltage. When the desired output voltage is reached, the current is reduced and the device stops converting energy.

Conclusion

160-822FS is a type of fixed inductor used in many applications. This article discussed the application field and working principle of the 160-822FS. The device is typically used in power electronics and automotive applications, where a steady current is needed. It works by relying on the relation between the inductance of an inductor and the current passing through it. This device is a reliable and efficient choice for many applications, as it has a high inductance and low resistance.

The specific data is subject to PDF, and the above content is for reference