160R-222HS

DC Resistance (DCR):	930 mOhm Max
Height - Seated (Max):	0.080" (2.03mm)
Size / Dimension:	0.150" L x 0.120" W (3.81mm x 3.05mm)
Supplier Device Package:	--
Package / Case:	2-SMD
Mounting Type:	Surface Mount
Inductance Frequency - Test:	7.9MHz
Operating Temperature:	-55°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	98MHz
Q @ Freq:	36 @ 7.9MHz
Series:	160R
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	370mA
Tolerance:	±3%
Inductance:	2.2µH
Material - Core:	Iron
Type:	--
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed InductorsInductors are electronic components that use the magnetic field produced by a current flowing through a coil to store energy either temporarily or permanently. They are commonly used in low-frequency applications such as power supplies, radios and amplifiers. They are usually classified according to the type of core material, the windings, and the form factor. The 160R-222HS is a fixed inductor that works on the principle of mutual induction, where a changing magnetic field induces an electromotive force (EMF) in a second circuit.The 160R-222HS is a through-hole, self-supporting type inductor that has a radial layout. In terms of form factor, it has a rectangular body that measures 16 x 8 x 7 mm and weighs 5.15 g. This component is typically used in low frequency alternating current (AC) applications and is ideal for use in electrical circuits that require high isolation and medium inductance. The 160R-222HS is typically constructed from a core of ferrite material, which is an iron-oxide based mixture. The ferrite core helps to concentrate the magnetic flux produced by the component, thus increasing its performance. It is typically wound with an enameled copper wire, which provides good protection and insulation against electrical interference. This type of core material and winding provide broad operating temperature range of from -40°C to +85°C. The 160R-222HS is designed for medium inductance of 2.2 mH at 10 kHz with a DC resistance of 160 ohms. The rated current for the component is 4.5 A and its self-resonance frequency (SRF) is 197 MHz. The component also has a low saturation current rating of 0.2 A, and it can withstand a maximum dc bias current of 3000 mA.The 160R-222HS is designed primarily for low-frequency AC applications, such as power supplies, control circuits, amplifiers, and filters. It can also be used in high-frequency applications such as radio frequency (RF) transmissions. The component offers good electrical and thermal protection due to its enameled copper wire winding, and it also has a low temperature rise, which reduces the likelihood of overheating.The 160R-222HS is capable of handling large amount of current, and it is reliable when used at high frequencies. It is typically used in high isolation and low inductance applications due to its ferrite core and high efficiency due to its winding. This component is widely available and relatively inexpensive, making it a popular choice for designers and hobbyists alike.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description