1658-G21-06-P13-10A

Series:	1658
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Thermal
Moisture Sensitivity Level (MSL):	--
Current Rating:	10A
Voltage Rating - AC:	240V
Voltage Rating - DC:	28V
Number of Poles:	1
Actuator Type:	Push to Reset
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Circuit breakers, often abbreviated as CBs, are deices in electronic circuits that are designed to protect the components of the circuit from damage due to transient changes in voltage or current. A circuit breaker can be used to protect a circuit from electrical overloading, short circuits or ground faults, by immediately disconnecting the power to the circuit when changes in the current or voltage are detected. The 1658-G21-06-P13-10A is a type of circuit breaker that is designed for medium voltage applications. This article will discuss the application field and working principle of the 1658-G21-06-P13-10A circuit breaker.

Application Field

The 1658-G21-06-P13-10A circuit breaker is used in medium voltage applications, where the voltage of the circuit is greater than 1000 Volts. This type of high voltage circuit can be found in power plants, mines, mills and other industrial and commercial settings. This circuit breaker can be used to protect large scale electrical networks, or individual pieces of equipment and machines, from electrical damage due to overloads or faults.

Working Principle

The 1658-G21-06-P13-10A circuit breaker works by disconnecting the power supply to the circuit in the event of an electrical fault or overload. When the current or voltage in the circuit becomes too high, the circuit breaker will trip and disconnect the power to the circuit. This prevents further damage to the components of the circuit by preventing excessive current or voltage from flowing through it. The circuit breaker works by having a detecting unit that is connected to the power supply of the circuit. This detecting unit is designed to measure the amount of current and voltage flowing through the circuit. If the current or voltage exceed a certain threshold, the detecting unit will activate a device inside the circuit breaker, which will cause it to trip and disconnect the power to the circuit. This prevents further damage from occurring. The 1658-G21-06-P13-10A circuit breaker is designed to be automatic, meaning it will detect and trip in the event of an overcurrent or overvoltage without any user intervention. This allows the circuit to be protected from damage without the user having to do anything.

Conclusion

The 1658-G21-06-P13-10A circuit breaker is designed for medium voltage applications, where the voltage of the circuit is greater than 1000 Volts. This type of circuit breaker is used to protect electrical networks and individual pieces of equipment from electrical damage due to overloads or faults. The circuit breaker works by disconnecting the power supply when the current or voltage in the circuit exceeds a certain threshold. This prevents further damage to the components of the circuit. The 1658-G21-06-P13-10A circuit breaker is designed to work automatically, meaning it will detect and trip in the event of an overcurrent or overvoltage without any user intervention.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description