1700121

Mounting Type:	Through Hole
Screw Thread:	M2.5
Torque - Screw:	0.4-0.5 Nm (3.5-4.4 Lb-In)
Screw Material - Plating:	--
Clamp Material - Plating:	--
Contact Material - Plating:	--
Housing Material:	Polyamide (PA), Nylon
Operating Temperature:	--
Color:	Green
Features:	Interlocking (Side)
Wire Termination:	Screw - Pressure Clip
Series:	COMBICON FRONT
Wire Gauge:	12-30 AWG
Voltage:	300V
Current:	10A
Mating Orientation:	Horizontal with Board
Pitch:	0.197" (5.00mm)
Positions Per Level:	3
Number of Levels:	1
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks are commonly used for wiring of power distribution systems, control panels, industrial electronic systems and various lighting applications. The main purpose of using terminal blocks is to connect wires together to allow a safe connection for power and data.Terminal blocks are available in various types such as single-pole terminal blocks, two-pole terminal blocks, three-pole terminal blocks, and multi-conductor terminal blocks. The types of terminal blocks are determined by the number of poles on the terminal block. Single-pole terminal blocks are used for single conductor cable, two-pole terminal blocks are used for two conductor cable, and so forth.Terminal blocks are also classified into two types – wire-to-board and board-to-board. Wire-to-board terminal blocks are used for connecting two wires, circuit boards, or cables together. These blocks are designed for use with high-current applications and are available in various sizes and configurations. The design and size of the terminal blocks are determined by the current rating and voltage requirements of the application.The working principle of a wire-to-board terminal block is simple. The terminal block has two terminals, one for the wire that will connect to the circuit board, and the other for the wire that will connect to the power source. When the wire is wired into the terminal block, the contact between the two terminals creates a bridge that closes the gap, thus completing the circuit and allowing electricity to flow.The terminals of wire-to-board terminal blocks can be made of a variety of materials such as brass, zinc plated steel, composite insulated steel, tin-plated copper, and even gold. Each type of terminal material has specific advantages and disadvantages, and therefore it is important to select the appropriate terminals for the application. In addition, wire-to-board terminal blocks are also available in different insulation materials including heat shrink, plastic, ceramic, and fiberglass.Terminal blocks are often used in a variety of applications, such as in industrial automation, electrical and electronic controls, and illumination systems. They are easy to install and can be connected to existing wiring systems or used to create new wiring systems. In some cases, they can also be used to connect multiple circuits or components together, for improved performance and reliability. With their durability and low cost, terminal blocks are a popular choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description