170L7001

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 170L7001 is an electrical, specialty fuse intended to protect power transformers from overloads and short-circuits. It can be used in a variety of applications, but is specifically designed for use in transformers with a system voltage of less than 1000 volts. This type of fuse is a cylindrical, low-melting-point alloy tube that is designed to open the circuit when a predetermined amount of current passes through it. The fuse is fitted into a tube with airways to direct the current flow to the fuse element. The tube also has a flange at one end which helps to ensure an airtight seal to the transformer.

The fuse is rated in terms of voltage and current, and is designed to carry a definite amount of current. The current rating determines the size of the fuse element and the maximum operating temperature of the element. The size of the fuse element is determined by the capability of the element to dissipate more energy than required to melt the alloy. The maximum operating temperature is determined by the melting point of the alloy used in the fuse.

The operation of the 170L7001 fuse is based on the Joule heating principle. This states that the heat generated in the element is proportional to the square of the current that passes through it. When the current exceeds a predetermined amount, the temperature of the element rapidly increases and melts the alloy. When the alloy melts, an arc is established between the contacts, which rapidly dissipates the excess current and interrupts the circuit.

The 170L7001 fuse must be installed in a well ventilated area and away from strong magnetic fields, vibration or shock. It should also be installed in a location that is accessible for maintenance and inspection. When installing the fuse, special attention must be given to ensure that all electrical connections are firmly tightened and that the fuse is properly grounded. Proper grounding helps to ensure that, should an electrical fault occur, the fuse will be able to protect the transformer and other related circuits.

The 170L7001 is a reliable and cost-effective fuse to protect power transformers from overloads and short-circuits. The fuse is designed to carry a definite amount of current and is rated in terms of voltage and current. Its operation is based on the Joule heating principle, and it must be installed with proper grounding for maximum protection. Its wide range of applications make it an ideal choice for protecting power transformers.

The specific data is subject to PDF, and the above content is for reference