170M4661

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 170M4661 is an electrical specialty fuse that functions as a safety device used to protect other electrical components from overload or short-circuit conditions. It is designed to detect a fault condition and swiftly break the connection between two points, to stop the electricity from flowing and protect other components from damage.

The fuse is made up of a thin wire or strip of metal, usually made from copper, encased in a protective casing. The wire is extremely heat-sensitive, so when the flow of electricity becomes too high, for example due to an overload or fault condition, the heat generated causes the wire to melt or burn out and therefore break the circuit, interrupting the electricity flow. This prevents other components in the electrical circuit from sustaining damage.

The 170M4661 is a glass-bodied, very fast acting, single-use fuse designed for a wide variety of industrial applications. It is typically used in places where a large amount of current may flow—such as in industrial machines, electrical systems, or electronic devices. It is also used to protect components in the circuit that are sensitive to any possible short-circuit or overload conditions.

The fuse itself is composed of a metal strip that acts as the conductor of electricity. It is usually made from tin, silver, or copper and is enclosed in a cylindrical glass body. The use of glass is important since it will allow the user to easily inspect the fuse for burnout and damage, while also protecting the metal and making it much more heat resistant. The metal strip is also wound into a coil that will help further protect it from heat.

During normal working conditions, the current passes through the fuse without any issue as it is designed to be non-reactive under normal loads. However, if an overload or fault condition occurs, the increased electrical current causes the metal to heat up and the strip bends or melts, stopping the flow of electricity. The typical breaking capacity rating for a 170M4661 fuse is up to 170kA, making it highly reliable and suitable for most industrial applications.

When inspecting the fuse, it should be noted that visible signs of damage or burnout must never be accepted, as this could indicate a fault. If the fuse is found to have been damaged, it should be immediately replaced with a new one, and the condition of the rest of the electrical system should be checked before attempting to use it again.

In conclusion, the 170M4661 is a specialized electrical fuse that is used in a variety of industrial and commercial applications in order to protect other electrical components from overload and short-circuit conditions. It is a glass-body, very fast acting single-use fuse that provides a reliable protection up to 170kA breaking capacity. It is highly heat-resistant and easily inspectable, allowing users to spot any damage or burnout quickly.

The specific data is subject to PDF, and the above content is for reference