170M4865D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
The 170M4865D is an electrical appliance designed to protect electrical circuits from current overloads, short circuits, heat damage, and other dangerous situations, while allowing normal current flow. It is categorized as part of the Electrical, Specialty Fuses family, and typically used in lighting and power distribution systems.

Design Features
The 170M4865D is a medium and fast-acting fuse, suitable for indoor and outdoor uses. It has a voltage rating of 600V AC/DC, and an interrupt rating of 10kA AC at 600V. It is constructed of metal with an epoxy resin coating, and its design is 25A IEC compliant. It measures 1.25" x 0.5", and is UL listed.

Operating Principle
The 170M4865D works by using a conductive metal strip that bridges two contacts on a circuit board. When the current flowing in the circuit rises to the pre-designated level, the metal strip will heat up and blow, breaking the circuit and cutting off power to the appliance. This process is known as fusing, and the 170M4865D is designed to do so quickly and reliably.

Application Fields
The 170M4865D is a single-pole, medium-breaking fuse suitable for use in industrial and commercial installations. It is mostly used in lighting, including decorative and outdoor installations. It is also suitable for use in power distribution systems and industrial equipment. It can be used for both AC and DC circuits, and its compact size makes it ideal for tight spots.

Installation
The 170M4865D comes with a marker that needs to be attached to the base potential (or ground). The fuse element should be centered in the holder, and the contacts must be aligned properly. The direction of the fuse element does not matter, as long as the marked pole is connected to the base potential. The recommended tightening torque of the terminals is 8-10Nm. It is also important to ensure there is enough clearance around the fuse to prevent any contact with objects that could cause a short circuit.

Safety
The fuse must be installed correctly in order to provide safety for the user. Fuses must be regularly inspected and replaced when necessary. It is important to check the fuse regularly to ensure it is functioning properly and that there is no physical damage to the element or other parts of the fuse. All personnel working under high-voltage conditions should always adhere to safety standards, and wear the proper protective gear.

The specific data is subject to PDF, and the above content is for reference