170M5118

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses are electrical components that are designed to protect electrical circuits from damage due to overload or overvoltage. The 170M5118 is a special type of fuse which is designed to protect semiconductor devices such as integrated circuits, transistors, etc. from damage due to overvoltage or overcurrent.

The 170M5118 is a dual-purpose fuse which is both a fast-acting and slow-blow fuse. The fast-acting fuse element has a very fast response time, which is typically less than 70 microseconds. This helps protect components against damage from momentary over-voltage or over-current situations. On the other hand, the slow-blow fuse has a much slower response time compared to the fast-acting fuse, which can take up to 2 seconds. This helps protect components in more prolonged over-voltage or over-current situations.

The 170M5118 fuse has an applicable voltage rating of 32V DC and an applicable ampere range from 1 AMP to 50 AMPs. The physical size of the fuse is 4.4mm by 17mm, which makes it ideal for use in most electronic circuit designs. The fuse is available in both inline and surface mount styles.

The working principle of the 170M5118 is fairly simple. It works by using a metal fuse wire which is embedded between its fuse housing and its contact terminals. When the current passing through the fuse exceeds the rated limit, the fuse wire melts, thus allowing the electricity flow to be interrupted. This prevents the damage that could occur due to an overload or overvoltage.

The 170M5118 is widely used in consumer and industrial electronics, such as computers, cell phones, televisions, industrial control systems, automotive electronics, etc. It is also a popular choice among hobbyists and DIY enthusiasts for its low cost and easy installation.

In conclusion, the 170M5118 fuse is a special type of fuse which is designed to protect semiconductor devices from overvoltage and overcurrent. It is a dual-purpose fuse with fast-acting and slow-blow elements, and can handle up to 32V DC with a current range from 1 to 50 AMPs. It is widely used in consumer and industrial electronics. Its working principle is simple, and it is a great choice for hobbyists and DIY enthusiasts.

The specific data is subject to PDF, and the above content is for reference