170M5746

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Electrical specialty fuses are used in many applications. The 170M5746 is a special type of fuse used to protect critical electrical circuits. This article will explain the application field and working principle of the 170M5746.

The 170M5746 is usually used for protecting industrial and commercial machinery. It is specifically designed to protect against short-circuiting of the electrical system. The fuse can be used in either a standard or a higher current range. It is designed to operate under a wide range of temperatures and power levels.

The standard version of the 170M5746 provides protection against circuit overloads up to sixty-five amps. It has a temperature rating of 105 °C (220 °F) and a maximum power rating of 2760 watts. The higher current version of the 170M5746 can provide protection up to one-hundred amps. It is also approved for use in UL and CSA-listed applications.

The 170M5746 fuse is designed to open when the current flowing through it exceeds its safe working value. This is accomplished by the use of a bimetallic strip that is heated by the current. When the current reaches a specific temperature, the strip will expand creating a gap inside the fuse and causing the fuse to open, thereby breaking the circuit and protecting the components.

The 170M5746 is a time-delay fuse, which means that it will not open immediately upon exceeding its current rating. Instead, it will take a certain amount of time before it trips. This allows enough time for the cause of the overload to be determined, thus avoiding unnecessary electrical circuit interruption. The time-delay of this particular fuse is approximately 5 seconds (at 500% rated current).

In addition, the 170M5746 is classified as "slow-blow" fuse. This means that it is designed to withstand short-term overloads such as high inrush currents or motor start-up surges. This type of fuse is often used in motors, where the inrush current is greater than the motor\'s normal running current.

The 170M5746 also provides excellent arc-fault protection. This means that it will trip even if an arc-fault occurs within the circuit. An arc-fault is an electrical fault that can occur between two conductors and can cause serious damage to electronic components. The fuse will detect and trip if the current levels exceed the safe cutoff levels.

To ensure proper operation and safety, it is important to note that the 170M5746 fuse has specific installation requirements. It must be mounted in a horizontal position and connected with a clamp or a washer. It must also be securely fastened to the device. In addition, the fuse should never be inserted directly into an electrical panel or socket as this can increase the risk of shorting.

In conclusion, the 170M5746 is a special type of electrical specialty fuse. It is designed to operate in a wide range of temperatures and power levels and is approved for use in UL and CSA-listed applications. It provides protection against overloads, short-circuits, and arc-faults. Its time-delay and slow-blow characteristics also make it suitable for protecting motors. It is important to note that the fuse has specific installation requirements for proper and safe operation.

The specific data is subject to PDF, and the above content is for reference