170M6709

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 170M6709 is a type of electrical specialty fuse used to protect circuits and equipment from current overload. It is designed to detect and interrupts current flow when an overload or short-circuits occur. The fuse is used in a wide variety of applications, such as in low-voltage circuits, consumer electronics, and industrial settings. The fuse is available in various sizes, rated currents, and time-delay characteristics, making it suitable for many different applications.

The fuse is made up of a metal alloy element surrounded by an insulating material. The element is connected to two end caps and a fuse holder. When the current in the circuit exceeds the rated value of the fuse, the metal element melts, and the circuit is interrupted. The metal alloy is designed to have a melting point that is higher than the rating of the fuse, ensuring that the circuit won’t be interrupted when a smaller current passes through.

The rated current of the fuse is marked on the fuse body. When current exceeds the rated current, the current will heat up the element, causing it to expand and stretch until it eventually melts and breaks the circuit. The speed at which the element melts and interrupts the circuit is known as the "time delay" of the fuse. Some fuses have a time delay of a few milliseconds, while others can take several seconds to trip.

The 170M6709 is a fast-acting, time-delay Class CC fuse. This type of fuse is designed to protect electronic circuits from fault currents caused by short-circuits and other overloads. The time-delay feature prevents nuisance tripping, and the Class CC electrical rating allows the fuse to be used in a variety of circuits.

The 170M6709 fuse is most commonly used in automotive electronics, consumer electronics, and industrial control circuits. It can be used to protect against short-circuits and overloads in most low-voltage applications, including lighting, motor control, power supplies, and general purpose electrical circuits.

The fuse is rated at 250 volts and 10 amperes, and has a time-delay of 500 milliseconds. The fuse is also UL listed, meaning it meets the required safety standards for use in various applications.

The 170M6709 is an excellent choice for protecting electronic circuits and equipment. It is designed to detect and interrupt current flow when an overload or short circuit occurs, yet it will not trip when smaller currents are present. The fuse is available in a variety of sizes and time-delay characteristics, making it suitable for many different applications.

The specific data is subject to PDF, and the above content is for reference