1714939

Mounting Type:	Through Hole
Screw Thread:	M3
Torque - Screw:	0.5-0.6 Nm (4.4-5.3 Lb-In)
Screw Material - Plating:	--
Clamp Material - Plating:	--
Contact Material - Plating:	--
Housing Material:	Polyamide (PA), Nylon
Operating Temperature:	--
Color:	Black
Features:	Interlocking (Side)
Wire Termination:	Screw - Rising Cage Clamp
Series:	COMBICON MKDS
Wire Gauge:	10-30 AWG
Voltage:	300V
Current:	30A
Mating Orientation:	Horizontal with Board
Pitch:	0.250" (6.35mm)
Positions Per Level:	2
Number of Levels:	1
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks are used to connect wires from equipment to boards. The 1714939 terminal block falls in the category of wire to board terminal blocks, which are used to secure a wire to a printed circuit board.

The 1714939 block is designed using an insulated plastic housing and has sliding multiple locking pins to secure a connection. Two of the most common uses of the 1714939 block are as a foot mount or header mount. When used as a header mount, the block’s connections are typically soldered onto a socket or a printed circuit board. On the other hand, when used as a foot mount, the block’s components fit into a molded plastic header that is used to connect more than one wire to the board.

The working principle is quite simple. A wire with an exposed end is inserted into the entry port of the terminal block which is then secured in place by sliding locking pins. When used as a foot mount, the terminal block is mounted into the plastic header, which acts as a protective shield. Inside the header, the pins at the back of the terminal block allow two or more wires to be connected to the same printed circuit board.

The 1714939 block is usually made from a heat-resistant material and has a greater operational temperature range than other similar blocks. Further, the wide operating temperature range allows it to be used in a variety of applications. The block is suitable for use in automation and industrial applications, power electronics, data communications, aerospace, heavy machinery, and medical equipment, among other areas.

In addition, the 1714939 block is designed to be used with input or output power signals. This is often used when the signal current is higher than the power signals. The block also has a wide range of pin lengths to ensure that any wire length can be used without compromising the connection. Furthermore, the block has a current carrying capacity of up to 2A.

The 1714939 block is relatively inexpensive to buy, which makes it an ideal choice for those who need a cost-effective solution for connecting multiple wires to boards. Furthermore, due to its simple and reliable working principle, it is easy to install and maintain. As a result, it provides a secure and reliable connection for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description