1715789

Mounting Type:	Through Hole
Screw Thread:	M3
Torque - Screw:	0.5-0.6 Nm (4.4-5.3 Lb-In)
Screw Material - Plating:	--
Clamp Material - Plating:	--
Contact Material - Plating:	--
Housing Material:	Polyamide (PA), Nylon
Operating Temperature:	--
Color:	Green
Features:	Interlocking (Side)
Wire Termination:	Screw - Rising Cage Clamp
Series:	COMBICON MKDS
Wire Gauge:	14-30 AWG
Voltage:	300V
Current:	15A
Mating Orientation:	Horizontal with Board
Pitch:	0.200" (5.08mm)
Positions Per Level:	8
Number of Levels:	1
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

• Introduction:

Terminal blocks, also known as spring terminals, consist of two or more conductive elements that are connected by a conductive or non-conductive material when a device is inserted. Terminal blocks can be found in many industries and applications including industrial control, electrical engineering, and electronics. They are commonly used to connect electrical wires, signal cables, and other types of wires in order to provide an efficient, safe, and reliable connection between two electrical components.Terminal blocks - Wire to Board is one of the most popular terminal block configurations. This type of terminal block allows for larger gauge wire to connect directly to a board. This configuration provides an efficient and secure connection between wires and the board.

• Functionality:

Terminal blocks - Wire to Board provide an efficient, secure connection between wires and the board. This type of terminal block allows for larger gauge wire to be connected directly to the board. This configuration allows for faster and more reliable connections between components, which can reduce setup times and improve reliability.The terminal block also provides protection from electrical noise and interference. It also helps to increase the safety of the connection by preventing it from over-heating or shorting out due to a loose connection or damaged wire. The terminal blocks also provide a secure and protective connection for high-current applications.

• Design:

Terminal blocks - Wire to Board are designed to be both efficient and reliable. The board has two or more pins that can support a variety of gauge wires. The pins are made of high-grade copper or aluminum and are usually insulated. This prevents any electrical shock or damage when connecting the wires to the board.The board is typically designed with a number of holes where wires can be inserted. This enables multiple wires to be connected to the board securely. The terminal blocks are also designed to ensure a secure connection between the wires and the board, so that the wires remain connected even during vibration and extreme temperatures.

• Applications:

Terminal blocks - Wire to Board can be used in a variety of applications. They are commonly used for industrial control, electrical engineering, and electronics. This type of terminal block is often found in industrial robotic control systems, circuit boards, and other electronic devices.These terminal blocks are also commonly used to connect electrical motors and other power sources, as well as to connect sensors and other electronic components. The terminal blocks are also used to connect alarms or other warning systems that are used to detect problems in complex and sensitive electronic systems.

• Working Principle:

The working principle of the terminal block - Wire to Board is straightforward. The wires are inserted into the holes on the board and then the board is secured in place. The board itself is designed to ensure that the wires are properly connected and remain secure.Once the wires are connected to the board, the board is then connected to the power source or other component using the necessary cables and connectors. This completes the connection between the two components and allows for the safe transfer of power or data from one component to another.

• Conclusion:

Terminal blocks - Wire to Board are an efficient and secure way of connecting wires and other components to a board. The terminal blocks use high-grade copper or aluminum pins that are insulated, which helps to prevent any electrical shock or damage when making the connection. The terminal blocks also provide a secure connection for high-current applications and are often used in industrial control, electrical engineering, and other electronic applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description