1723586

Mounting Type:	Through Hole
Screw Thread:	M4
Torque - Screw:	1.2-1.5 Nm (10.6-13.3 Lb-In)
Screw Material - Plating:	--
Clamp Material - Plating:	--
Contact Material - Plating:	--
Housing Material:	Polyamide (PA), Nylon
Operating Temperature:	--
Color:	Green
Features:	Interlocking (Side), Positions Stamped
Wire Termination:	Screw - Rising Cage Clamp
Series:	COMBICON MKDS
Wire Gauge:	6-20 AWG
Voltage:	600V
Current:	60A
Mating Orientation:	Horizontal with Board
Pitch:	0.400" (10.16mm)
Positions Per Level:	3
Number of Levels:	1
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks, often referred to as wire-to-board systems, are electrical interconnects used to connect a wire to a board. They provide easy and flexible wire management for power distribution and data signaling. Terminal blocks are often used in various industrial automation applications such as in HVAC systems, robotics, and machine automation.Terminal blocks are used in a wide variety of applications and typically allow users to easily manage and connect multiple wires into a single electrical connection. Common uses of terminal blocks include: connecting power to multiple devices on a circuit board, creating signal pathways between sensors and industrial controllers or data acquisition systems, and providing a connection point for wires and cables. The most basic version of a terminal block utilizes screw terminals to make a secure connection between wires and a board. The two most common types of screw terminal designs are double-level and single-level designs. In a double-level design, the screws connect each terminal block to the side of the board, while in single-level designs, the screws go through the center of the terminal block. Terminal blocks can also be used to connect power to several different devices in a variety of ways. One popular method is to use a power distribution block, which distributes power from a single power source to several different components or devices. This type of terminal block typically has two or more input connections that are connected with a single output. This type of block can also be used to route power from a source device to multiple destination devices. Terminal blocks can also be used for signal routing. This type of terminal block can be used to transmit a signal from one device to another, or to separate signals between multiple devices. The most common type of signal terminal blocks are those that are used in industrial control systems. These types of blocks typically have multiple inputs and outputs, allowing signals to be transmitted from the same source to multiple devices. These types of signal terminal blocks can also be used to transmit signals between two different locations. Terminal blocks can also be used for electrical safety. Common safety features found in terminal blocks include a fuse or circuit breaker, a grounding post, and a strain relief mount. A fuse or circuit breaker provides overcurrent protection by interrupting the electrical circuit when excessive current is detected, while a grounding post ensures electrical equipment is properly grounded. The strain relief mount helps reduce the stress and strain on wires that are constantly being flexed or moved. Terminal blocks are a very important part of any electrical system, and can be used in a variety of applications. They provide a safe, reliable, and cost-effective way to connect multiple wires to a single board, and provide convenient options for connecting power, signal, or other potential sources. With the right terminal blocks, users can easily control and manage a variety of devices, systems, and applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description