1771156 Connectors, Interconnects

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks are devices designed to quickly and securely make connections between electrical wiring circuits. With terminal blocks, you can easily connect a variety of circuits and components to a single power source. The wiring blocks come in several different shapes and sizes. They are generally designed for single- or multi-conductor connection applications. The most common kind of terminal block is known as a wire-to-board connector.

Terminal blocks - Wire to Board connection is the most common type of terminal block. It usually consists of two pairs of terminals, one at each end. The upper block is the female end and the lower block is the male end. Each terminal has a tiny hole in the middle for the wire to be inserted into. The wire can either be soldered or screwed in. Once the connection is made it is locked in place using a locking device on the female side.

In a basic wire to board connector, the power flow is from the top section of the terminal block to the bottom. This means that current passes through the hole in the upper block and onto the wire which is then connected to the lower block. This configuration is known as power feed, since it is used to provide power from a power source to the circuit.

Wire to board connections can also be used to power components in a circuit. For example, when connecting a LED to a power source, the power can travel through the hole in the upper block of the terminal and onto the wire which is then connected to the lower block. From the lower block, the power is then routed to the LED through a series of resistor and diode. This configuration is known as the power feed-through, since the power is routed from the top to the bottom and then to the component.

Wire to board connectors are generally found in a wide variety of applications such as in industrial machinery, consumer electronics, and automotive systems. They are used for electrical purposes such as connecting power sources to components, making connections between two or more circuits, and providing signal paths between components. They are also used to interconnect multiple boards in complex systems.

The working principle of a wire to board connection is simple. An electrical connection is the result of the current flow from the power source to the wire and then to the component. This current is called a current loop which is why these connections are also known as loop connectors. The current loop must be kept tight and secure in order for the connection to remain effective.

The design of a wire to board connector also depends on the type of application and the amount of current needed. Wire to board connectors can come with pins, screws, spring loaded holders, heat shrink, and crimp terminals. The type of connector chosen should be based on the specific requirements of the application, such as current requirements, voltage requirements, or other conditions.

The 1771156 wire to board connector is an industrial grade, board mounted terminal block used for making electrical connections. It features a wide design with two levels of connection and disconnection. The 1771156 offers superior mechanical performance and reliable connection, even in harsh environments. The terminal block is easy to install and is available in several configurations and sizes.

In conclusion, terminal blocks - wire to board connectors are essential components in a variety of electrical systems. They are designed to quickly and securely make connections between electrical wiring circuits and can be used to connect power, signal, or logic circuits. The 1771156 model is also an excellent choice for industrial applications and offers superior performance and reliability.

The specific data is subject to PDF, and the above content is for reference