177200175100002

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Backplane Connectors are connectors used to make connections between two or more backplanes, either internally or externally. Backplane Connectors come in different shapes and sizes depending on the application. The most commonly used connectors for backplanes are Hard Metric, Standard, and Micro Pitch. Each type of connector has its own application field and working principles and each has its own advantages over the others.

Hard Metric Connectors are designed for high-speed data transmissions between boards and allow for up to 40 Gbps. They are widely used in high-end applications that require fast and reliable connections. The pins are spaced along the connector in 1 mm increments, allowing for a higher density of pins. Hard metric connectors also typically have more pins, allowing for more complex circuitry and increased data transfer speeds. One of the benefits of using Hard Metric Connectors is that they are relatively easy to use and maintain compared to other connector types.

Standard Connectors are used when speed and performance are not as critical. The pins are spaced in a 2.54 mm pitch, which makes them easier to use than Hard Metric Connectors. They are often used in applications that do not require fast data transmission, such as consumer electronics, and are widely available. The standard connector is also the most cost-effective option for backplane connections.

Micro Pitch Connectors are designed for high-density applications, such as in consumer electronics, in which the number of pins is limited. The pins are spaced in a 0.8 mm pitch, which gives them a much higher density. This makes them ideal for applications that require speed and performance, but do not require a large number of pins. Micro Pitch Connectors also tend to be more expensive than other connector types due to their higher density.

No matter which type of Backplane Connector is used, the most important thing is to ensure that it is properly installed and functioning according to the requirements of the application. All of these connector types are easily available and have their own benefits and drawbacks. It is important to choose the right connector for the application; otherwise, performance will suffer and connections could be lost.

The specific data is subject to PDF, and the above content is for reference