18/22CDC.41.B4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Multiple conductor cables refer to insulated cables that contain two or more conductors in a single sheath. These are also referred to as multicore cables, multiple conductors, multi-wire cables, or multi-wire tension cables. The most common applications for multiple conductor cables are in industrial and commercial applications.

What is the 18/22CDC.41.B4?

The 18/22CDC.41.B4 is a type of multiple conductor cable developed for use in commercial and industrial applications. It is a four-conductor cable, with a diameter of 18 AWG for two of the conductors and 22 AWG for the other two. This type of cable is often used in installations where medium capacity power transfer is required.

Application Field of 18/22CDC.41.B4

18/22CDC.41.B4 is commonly used for machine control, lighting wiring, data acquisition, servo motor wiring, signal lines, and general wiring applications. It’s considered a medium capacity power transfer cable, but also suitable for high voltage applications, with a maximum voltage rating of 600 Volts.

Working Principle of 18/22CDC.41.B4

The 18/22CDC.41.B4 operates with multiple conductor strands that are insulated by a common sheath. Each individual conductor is electrically insulated from other conductors for maximum safety and reliability. The 18 AWG conductors provide better voltage and current carrying capacity than the 22 AWG conductors. The larger conductors are also less prone to failure than the smaller ones.

The multiple conductors in the sheath of the 18/22CDC.41.B4 provide extra protection against electrical interference. Since the conductors are shielded from each other, any energy from outside sources inducing in one will only be present on that conductor. This means that any interference between conductors is drastically reduced.

The specific data is subject to PDF, and the above content is for reference