1810BP07D200E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Filters

RF filters are resonant circuits that are used to pass or stop signal frequencies. They are used on transmitter and receiver systems to ensure effective signal transmission. This article is about the 1810BP07D200E application field and working principle.

Application field of 1810BP07D200E

The 1810BP07D200E is a miniature, surface-mountable RF bandpass filter for use in high-volume telecommunication and consumer electronic products with a center frequency of 7GHz. It is designed for receivers and transmitters in the VHF, UHF, and microwave bands, and provides excellent passband performance and low insertion loss for high performance applications.

The 1810BP07D200E is ideal for microwave technology and wireless communication products, including cellular phones, PDAs, cordless phones, satellite receivers, RFID tags, and GPS receivers. It is also suitable for instrumentation applications such as test equipment, covers the frequency range of from 6 to 8GHz, and is well-suited for military and aerospace applications.

Working principle of 1810BP07D200E

The working principle of 1810BP07D200E is based on the transfer function of a low-pass filter (LPF). A low-pass filter is a circuit designed to pass signals with frequencies below a certain cutoff frequency while blocking signals with frequencies above that same cutoff frequency. The circuit is made up of a resistor and a capacitor, and its transfer function is a simple one: the higher the residence time of signal on the resistor, the more signal passes through.

The 1810BP07D200E bandpass filter takes this principle and combines it with a high-pass filter (HPF) to create a bandpass filter. It uses two circuits: one with a low-pass filter and one with a high-pass filter. The low-pass portion passes signals with frequencies below a certain cutoff frequency while blocking signals with frequencies above that same cutoff frequency. The high-pass portion passes signals with frequencies above a certain cutoff frequency while blocking signals with frequencies below that same cutoff frequency.

When the two circuits are combined, they form a "notch" that allows only certain frequencies to pass through. This notch is called a center frequency, and the signal frequencies that are allowed to pass depend on the cutoff frequencies of the low-pass and high-pass filters. Any signal frequencies that lie within the notch will pass through, and any frequencies outside the notch will be blocked. This makes the 1810BP07D200E an ideal solution for applications that require selective frequency transmission.

Conclusion

1810BP07D200E is a miniature, surface-mountable RF bandpass filter that can be used in high-volume telecommunication and consumer electronic products. It operates on the principles of low-pass and high-pass filters, which are combined to create a "notch" that allows only certain frequencies to pass through. This makes the 1810BP07D200E an ideal solution for applications that require selective frequency transmission.

The specific data is subject to PDF, and the above content is for reference