1812-682F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors, as the name implies, are components that provide a fixed inductance. The 1812-682F is a surface-mount chip inductor with a maximum operating frequency of 5 GHz. It has an inductance of 0.68 uH, and a ceramic body with a ferrite core. It is rated to handle up to 17.7 mA of DC current, and is very small, measuring only 1.1 x 0.6 x 0.4 mm.

The 1812-682F is used in a variety of applications where a fixed inductance is needed. These include RF circuits, broadband filters, power electronics, voltage regulators, and high-frequency oscillators. It is also used in mixers in wireless communications, as well as in automotive applications.

The working principle behind the 1812-682F is fairly simple. Like any inductor, it is essentially an electrical coil. This coil stores energy in the form of a magnetic field when a current is applied. The inductance of the coil is directly proportional to its physical size and shape, and is calculated from the number of turns in the coil, the inductor wire diameter, and the core material. The inductance of the 1812-682F is 0.68 uH, which makes it ideal for filtering out certain frequencies in an RF circuit, or providing a small amount of voltage regulation.

The inductor is also capable of handling large amounts of DC current. This is due to the low resistance of the inductor, which is created by the ferrite core. This low resistance makes the inductance constant over a wide frequency range, allowing it to suppress high-frequency noise while allowing finer tuning of frequency response.

In addition, the 1812-682F is highly resistant to interference from external electromagnetic sources. This is because of the ceramic body, which provides shielding against EMI (electromagnetic interference). This makes the inductor ideal for use in high-frequency circuits, where EMI can interfere with proper signal transmission.

The 1812-682F is an ideal choice for RF/microwave applications because of its small size, high current handling, and constant inductance. It is easy to install and can be soldered onto circuit boards with ease. It offers excellent performance, and because of its shielding capabilities, it is also well-suited for use in automotive applications.

The specific data is subject to PDF, and the above content is for reference