182106

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF): 182106 Application Field and Working Principle

Coaxial connectors (RF) are cylindrical connectors specifically designed for use in radio frequency (RF) applications. They are used for transmitting signals, typically at voltages of up to 8,000 volts. These connectors are designed to minimize losses and performance drops due to signal transmission over long distances and in harsh environments such as high-altitude deployments. These connectors are used in many different fields but are particularly popular in satellite communication, navigation, and cellular networks.

The 182106 connector is one of the most widely used RF coaxial connectors in the world. This particular connector was designed for use in military and aerospace applications and is often specified in conditions requiring extreme temperature and vibration resistance. The 182106 connector features a threaded coupling nut barrel, which provides a reliable connection even in the toughest conditions. The connector also has a keying and lanyard system for easy and secure mating.

The construction of the 182106 connector is based on a threaded, molded coupling nut that mates with the surface of the male connector. The male connector contains a deeper, chamfered-slot at the center of the post for thread engagement. This ensures a firm connection between the components, preventing accidental disconnection. A dielectric foam core is used to separate the two conductors in the connector. This foam core provides electrical isolation in order to prevent electrical leakage or cross-talk between them.

The working principle of the 182106 connector is based on the principle of transformer action. The primary circuit is the input signal source, while the secondary circuit is the output. The primary circuit, consisting of low-frequency (LF) and high-frequency (HF) conductors, is connected to the main connector by a soldered connection. The secondary circuit is then connected to a matching network, which distributes the signal power in the correct proportions to the respective secondary terminals.

The 182106 connector is constructed with a dielectric foam core to provide isolation between the two circuits. In order to effectively transmit signals, the connector must possess a certain degree of electrical conductivity. This conductivity is achieved through the presence of an appropriate dielectric material between the two circuits, which helps to make them (at least partially) conductive. The dielectric material also helps reduce losses due to signal transmission.

The 182106 connector is designed to operate in the range of frequencies from 0Hz to 20GHz. This means that the connector can be used for transmission of signals at a range of frequencies, including ultra-high frequency (UHF), very high frequency (VHF), and microwave transmissions. The connector is also suitable for transmission of analogue and digital signals, and can be used for both single-mode and multi-mode applications.

The 182106 connector is made with high-quality materials and is designed to offer maximum signal integrity. Its design ensures a reliable connection even in the toughest conditions, making it an ideal choice for numerous military and aerospace applications. Additionally, the keying and lanyard system of the connector allows for secure mating and provides a visual indicator of a good connection.

The specific data is subject to PDF, and the above content is for reference