185223J100RAA-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film Capacitors

Film capacitors are electrical components with an insulating film as the dielectric and metal foil or metal-coated stearates as the electrodes. They are also known as plastic film capacitors, plastic capacitors, or even film dielectric capacitors. Film capacitors are typically comprised of three main components – an electrical conductor, such as metal foil; a dielectric, such as plastic or paper; and an electrolyte, such as a liquid or gel. When an electrical charge is applied to the capacitor, it creates an electric field across the dielectric, which stores electric energy.

185223J100RAA-F capacitors are applied as a general-purpose capacitor in AC/DC filter circuits. Primarily designed for capacitance values up to 10uF, 185223J100RAA-F capacitors are stabilizing capacitors, featuring a very high ripple current rating and low ESR (Equivalent Series Resistance). They are split into two different types: polyethylene naphthalate (PEN) and polystyrene. The PEN class has great high-frequency characteristics and superior temperature performance, and the polystyrene class has excellent insulation characteristics.

The working principle of the 185223J100RAA-F capacitors is based on the basic knowledge of capacitor behavior. A capacitor is a passive electrical component which can store energy in the form of an electric field between its two conductors. When an electric field is applied between these two conductors, a certain amount of electric charge is stored which accumulates an electric field. This electric field stores the electrical energy, and it is not discharged until the applied voltage drops, releasing the stored energy again.

The field effect of the capacitors affects the gains or losses that might be consequential with a particular frequency. In order to change the field effect, one needs only to adjust the frequency of the signal. This has consequently made them be a key essential for the regulation of gain in various types of audio filters and/or line equalizers. They are also often used to suppress various types of electromagnetic interference in electronic devices.

The 185223J100RAA-F capacitors are relatively small in size, making them ideal for being incorporated into a variety of different electronic components. They can be used in circuits meant to operate both audible and high frequency signals, as they have the capacity to withstand higher frequencies. This is in contrast to other types of capacitors, which can only operate at low frequencies.

When working with 185223J100RAA-F capacitors, it is important to make sure that the voltage applied is not too high in order to prevent damage to the capacitor. Also, pay attention to the polarity of the capacitor when fitting to the circuit board and use the right type of insulation to maintain the integrity of the capacitor. Care should also be taken when mounting the component, as the capacitor can be easily damaged during installation.

In conclusion, 185223J100RAA-F capacitors are ideal for a wide range of general-purpose AC/DC filter applications. Their high ripple current ratings, low ESR, and small size make them suitable for most circuit board designs. They have proven to be an invaluable tool for engineers in their efforts to improve audio signal integrity, suppress electromagnetic interference, and achieve power-saving solutions.

The specific data is subject to PDF, and the above content is for reference