18R-CBSA-3.0X3.5X0.13

Series:	10-CBS
Packaging:	Bulk
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.130" (3.30mm)
Length - Overall:	3.500" (88.90mm)
Width - Overall:	3.000" (76.20mm)
Ventilation:	Vent Holes in Pattern
Mounting Type:	Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF shields are used in a variety of applications, ranging from medical equipment to aerospace. The 18R-CBSA-3.0X3.5X0.13 is an example of an RF shield, which is designed to protect equipment from electromagnetic interference (EMI). In this article, we will discuss the application field and working principle of the 18R-CBSA-3.0X3.5X0.13.The 18R-CBSA-3.0X3.5X0.13 can be used in a variety of applications, including aerospace, medical imaging, consumer electronics, and automotive. In these applications, the 18R-CBSA-3.0X3.5X0.13 can provide protection from electromagnetic interference (EMI) that is generated from external sources. This protection can help increase the reliability of the system by minimizing interference with the desired signal.The working principle of the 18R-CBSA-3.0X3.5X0.13 is based on shielding. Shielding is a method that uses one or more conductive layers to create a barrier between two objects and protect them from external interference. The 18R-CBSA-3.0X3.5X0.13 consists of two layers of shielding material. The first layer is a conductive layer that is placed in the path of the EMI. This layer absorbs or blocks the EMI, preventing it from reaching the protected device. The second layer is a non-conductive layer, which acts as additional insulation and helps prevent any residual EMI from reaching the protected device.The 18R-CBSA-3.0X3.5X0.13 can be used in a variety of different applications, such as in medical imaging equipment, automotive equipment, and aerospace. In medical imaging applications, the 18R-CBSA-3.0X3.5X0.13 can be used to protect sensitive imaging equipment from external sources of electromagnetic interference. In automotive applications, it can be used to protect electronic systems from external sources of electrical noise. In aerospace applications, the 18R-CBSA-3.0X3.5X0.13 can be used to protect avionics and sensors from external sources of interference.The 18R-CBSA-3.0X3.5X0.13 is an effective RF shield, due to its two-layer shielding design. This design provides effective absorption and blocking of external sources of electromagnetic interference, while the non-conductive layer helps provide additional insulation to reduce any residual EMI. The 18R-CBSA-3.0X3.5X0.13 can be used in a variety of applications, where its shielding design can help protect sensitive equipment from external sources of interference.

The specific data is subject to PDF, and the above content is for reference