1944R-13H

DC Resistance (DCR):	230 mOhm Max
Height - Seated (Max):	--
Size / Dimension:	0.193" Dia x 0.447" L (4.90mm x 11.35mm)
Supplier Device Package:	--
Package / Case:	Axial
Mounting Type:	Through Hole
Inductance Frequency - Test:	25MHz
Operating Temperature:	-55°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	200MHz
Q @ Freq:	45 @ 20MHz
Series:	1944R
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	1.1A
Tolerance:	±3%
Inductance:	1µH
Material - Core:	Phenolic
Type:	Molded
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors are important components in electrical and electronics engineering. The 1944R-13H is a type of fixed inductor that is commonly used for DC voltage applications such as filtering, signal modulation, and energy storage. The 1944R-13H is constructed with a metal core that is wound with two coils- a primary coil and a secondary coil, with a ferrite core in between them. The coils are each constructed with an insulated copper wire and are covered by a plastic housing for additional protection. These two coils are then connected in series to form the complete inductor. The 1944R-13H is constructed to have a rated inductance of 13H at an operating temperature of up to 70°C. This inductor is designed for DC voltage applications, with a maximum operating voltage of 600V. This means that it can handle a large amount of current without being damaged. When a current passes into the primary coil of the 1944R-13H, it produces a magnetic field in the ferrite core, which in turn induces a voltage across the secondary coil. This induced voltage is proportional to the rate at which the current is changing over time, and is known as an inductance voltage. The 1944R-13H is commonly used in circuits for applications such as power supplies, switching converters, filters and signal modulation. It is also used in energy storage applications, such as capacitors and batteries. The 1944R-13H is often used to filter out AC signals and noise, reduce ripple components in power lines, or even to stabilize the voltage output on a circuit. Since the inductor acts as an impedance to AC signals, it can be used to reduce noise and interference.The 1944R-13H is also used in DC-DC converters to provide the required voltage for a circuit. In this application, the 1944R-13H acts as a transformer, altering the voltage from one end of the circuit to the other. This allows the circuit to control the current more effectively and effectively regulate the voltage output.The 1944R-13H is a highly reliable and efficient component, and is suitable for use in both small scale and large scale applications. It is a cost-effective, easy to use component, and is suitable for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description