1962940000

Series:	IE-Line
Part Status:	Active
Lead Free Status / RoHS Status:	--
Connector Style:	SCRJ
Moisture Sensitivity Level (MSL):	--
Connector Type:	Plug
Simplex/Duplex:	Duplex
Mode:	Multimode
Fiber Core Diameter:	--
Fiber Cladding Diameter:	--
Cable Diameter:	3.0mm
Mounting Type:	Free Hanging (In-Line)
Fastening Type:	Push-Pull
Housing Color:	Beige
Boot Color:	Black, Red
Ingress Protection:	IP20
Features:	Strain Relief
Attenuation - Typ:	-0.4dB
Reflection:	-30dB
Housing Material:	--
Ferrule Material:	--
Body Material:	--
Operating Temperature:	-40°C ~ 70°C
Mating Cycles:	1000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fiber Optic Connectors

Fiber optic connectors are usually composed of 2 main components: an optical fiber and a connector. The optical fiber is made of glass or plastic, which is used to transmit signals over long distances. The connector is used to attach the fiber to another device, such as a router or switch.Fiber optic connectors are used extensively in telecom, industrial, aviation, medical, and video applications. In each application, the connector must be configured differently to ensure the highest possible performance.There are several types of fiber optic connectors, including ST, LC, SC, and MPO. ST connectors are commonly used on older networking systems and are the least expensive connectors available. LC connectors are used mainly in high-speed networks, as they provide an economical way to support speeds of up to 10Gb/s. SC connectors are the most popular type of connector due to their cost and dependability in Gigabit Ethernet applications. Finally, MPO connectors are used in data centers and other large-scale applications due to their high-density port configurations.Fiber optic connectors are designed to transmit signals with little or no signal loss. A fiber optic link is typically made up of two fiber optic cables and two connectors. The connectors are used to join the cables in a secure connection. The connection is typically made using crimp or machine termination techniques.The performance of a fiber optic connection is dependent on the quality of the connector. As such, manufacturers of fiber optic connectors utilize advanced technologies, such as Ferrule Polish and PIM (Power Installed Method) to ensure their connectors are properly configured.The Ferrule Polish technique is used to ensure the connector is clean and has a smooth surface. This ensures a reliable, low-loss connection. PIM is used to ensure the connector is properly crimped or machined. A PIM-certified connector is much less prone to failure than a non-certified connector.Finally, connectors are tested for optical performance using an OTDR (Organic Test of Data Rate). This test is used to measure the insertion loss, connector return loss, and overall cable performance. A connector that meets the performance requirements of the data rate will provide a reliable connection.In conclusion, fiber optic connectors are a key component of any network system, from telecom to video. There are many different types of connectors available, each designed to provide reliable performance and ensure that signal loss is minimized. By using advanced testing and configuration techniques, manufacturers of fiber optic connectors can ensure their customers get the best performance from their connectors.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description