2-1377173-0

Series:	Plasti-Grip
Packaging:	Bulk
Part Status:	Active
Terminal Type:	Standard
Stud/Tab Size:	10 Stud
Width - Outer Edges:	0.375" (9.53mm)
Length - Overall:	0.920" (23.37mm)
Mounting Type:	Free Hanging (In-Line)
Termination:	Crimp
Wire Gauge:	16-22 AWG
Insulation:	Insulated
Features:	Serrated Termination
Color:	Red
Contact Finish:	--
Contact Material:	Copper
Insulation Diameter:	0.105" ~ 0.140" (2.67mm ~ 3.56mm)
Material - Insulation:	Poly-Vinyl Chloride (PVC)
Length - Ring Center to Termination:	0.312" (7.92mm)
Length - Termination:	0.416" (10.57mm)
Tongue Inside Opening:	0.197" (5.00mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

2-1377173-0 Application Field and Working PrincipleTerminals-Spade connectors are electrical connectors which are often used to connect wires to a device. The type of connector used is important in determining the functionality, strength, and electrical characteristics of the total connection. In this article we look at the application field and working principle of the 2-1377173-0 type of terminal-spade connector.The 2-1377173-0 spade connector is made up of two parts: the spade and the terminal. The spade is a notch in the connector, and the terminal is a piece with metal tabs, which is designed to securely grip and hold the wire. An array of these two parts form the connector, and that is why it is called a terminal-spade connector.The 2-1377173-0 spade connector is usually used in automotive wiring applications and is commonly obtained through after-market outlets. This type of connector is preferred in this field because of its high temperature resistance and durability, allowing the connector to function in high levels of heat and pressure while enduring mechanical stress.The working principle of the 2-1377173-0 spade connector is quite simple. The metal tabs, or lugs, of the spade are fit into the small holes of the terminal. These tabs are then soldered in place to form a secure connection between the wire and the terminal. This ensures that the wire is firmly held in place and that the connection between the terminal and the wire is properly made.The way the tabs are soldered is an important factor in order to ensure a strong bond between the wire and the terminal. The solder should be heated just enough to make sure that the wire and the terminal are adequately framed together, but not too hot to damage the metal work or cause shorts. The conductivity of the solder should also be taken into consideration, as it will affect the strength and reliability of the connection.The 2-1377173-0 terminal-spade connector is a great alternative to more costly and difficult-to-install electrical connectors, and it is used often in automotive wiring applications. The application field and working principle of this type of connector provide users with an easy-to-install, cost-effective, and highly reliable solution for their needs.

The specific data is subject to PDF, and the above content is for reference