Allicdata Part #: | CCM9070-ND |
Manufacturer Part#: |
2-1609034-0 |
Price: | $ 18.68 |
Product Category: | Filters |
Manufacturer: | TE Connectivity Corcom Filters |
Short Description: | LINE FILTER 250VDC/VAC 20A CHASS |
More Detail: | N/A |
DataSheet: | 2-1609034-0 Datasheet/PDF |
Quantity: | 7587 |
1 +: | $ 16.97850 |
10 +: | $ 16.46320 |
25 +: | $ 15.94910 |
50 +: | $ 15.43450 |
100 +: | $ 14.92000 |
250 +: | $ 13.37650 |
Series: | SB |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Current: | 20A |
Frequency - Operating: | 50/60Hz |
Applications: | General Purpose |
Approvals: | CSA, UR, VDE |
Operating Temperature: | -10°C ~ 40°C |
Mounting Type: | Chassis Mount |
Termination Style: | Threaded Post (8-32) |
Inductance: | 900µH |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
2-1609034-0 power line filter modules are standard EMI/RFI noise linear noise filters suitable for use in a wide range of industrial, automotive, telecoms and medical applications. They are designed to suppress transient surge impulses, high frequency conducted noise and electrical disturbances on AC and DC power lines.
2-1609034-0 power line filter modules are intended to protect connected equipment from electrical interference, or to prevent the interference generated by connected equipment from affecting other systems and equipment. As such, they are an important component in the design and installation of any electronic system, providing reliable performance and consistent protection from interference or transient impulse noise on the power lines.
2-1609034-0 power line filter modules are typically used for power supply lines supplying electronic equipment, such as computers, satellite receivers, set-top boxes and other digital systems, as well as telecommunications systems and medical instrumentation. They are also used on DC power lines, such as automotive or other vehicle power supplies, as well as for radio and television broadcast transmitters or other signal transmission lines.
The working principle of 2-1609034-0 power line filter modules is based on the concept of impedance matching. The filter is designed to provide a low impedance path for the desired signals but to reject unwanted signals, such as noise or interference. The filter module consists of a series of components, including capacitors, inductors and/or resistors. The capacitors and inductors act as impedance-matching components, while the resistors provide a low-impedance path for the desired signal. The capacitors, inductors and resistors are arranged in a circuit that is tuned for a particular frequency range. The filter is designed to reject frequencies outside of this range, while allowing signals within this range to pass through the filter with minimal distortion.
2-1609034-0 power line filter modules use a combination of high- and low-pass filter topologies to provide filtering over a wide range of frequencies. The low-pass filter topology is used for frequencies below 100kHz, while the high-pass filter topology is used for frequencies above 100kHz. This allows the filter to pass desired frequencies while rejecting frequencies outside of the desired range. The filter provides protection from a wide range of interference sources, including RF interference, conducted interference, electro-static discharge and transient impulses. In addition, the filter can also provide signal conditioning, such as the improvement of signal-to-noise ratio.
2-1609034-0 power line filter modules are available in various package sizes and configurations, depending on application requirements. These filter modules can also be adapted for use in multiple applications, allowing them to be used in a broad range of industrial, automotive, telecoms and medical applications. These filters are relatively small and lightweight, making them ideal for use in portable electronics, as well as for home or office use.
In conclusion, 2-1609034-0 power line filter modules provide a reliable and effective method of protection for electronic systems and equipment. They are designed to provide protection from transient impulse noise, high frequency conducted noise and electrical disturbances on AC and DC power lines. In addition, they can provide signal conditioning, such as the improvement of signal-to-noise ratio. As such, these filter modules are an important component in any electronic system design and installation, providing consistent protection from interference or transient impulse noise on the power lines.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT