Allicdata Part #: | 2-2151014-1-ND |
Manufacturer Part#: |
2-2151014-1 |
Price: | $ 2.08 |
Product Category: | Tools |
Manufacturer: | TE Connectivity AMP Connectors |
Short Description: | OC-PA-S-FM-042F048O-001-0145 |
More Detail: | Tool |
DataSheet: | 2-2151014-1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 1.89000 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crimpers, Applicators, and Presses, often abbreviated as CAPs, are mechanical devices designed to crimp, apply, and press various components used in the manufacture of different products. Applied force is used to bend, crimp, and shape various components such as wires, terminals, and connectors. While their approach and application are different, all three share a common objective: to precisely connect two or more components using crimping, application, or pressing techniques.
A crimper is a device used to fasten electrical or mechanical components. The crimper applies mechanical force to a component\'s shape in order to tighten or hold it in place. Crimpers are used in a variety of applications and are most commonly found in the manufacture of electronics, and the assembly and repair of electrical and mechanical components.
An applicator is a device used to apply adhesive, sealants, or lubricants to substrates in order to form a tight bond. Applicators are used in a variety of applications and are most commonly found in the manufacturing of electronics, and the assembly and repair of electrical and mechanical components.
A press is a device used to exert force on a material in order to form it into a desired shape. Presses are used to form components such as screws, rivets, and gaskets. Presses are commonly found in the manufacturing of electronics, and the assembly and repair of electrical and mechanical components.
The application of CAPs varies across numerous industries. They are used in the automotive, electronics, telecommunications, medical, appliance, and defense industries to name a few. They are particularly appropriate for applications where the force and shape of components must be precisely maintained for reliable connection.
The working principle of CAPs is relatively simple. They operate by using a principle known as die cutting. A CRAP is equipped with two or more die blocks that are typically made of hardened metal but can also be made of other materials such as plastic, rubber, or wood. The first die block acts as an anvil and the second encloses the component to be crimped, applied, or pressed. When force is applied, the component is forced into the shape of the second die block and is held in place until the force is released.
CAPs are used in a variety of applications and are generally safe and efficient when used properly. They are designed to be robust and accurate, and can be used to produce strong, reliable connections. They are generally simple to use and require minimal operator training, making them ideal for use in a variety of industries.
The specific data is subject to PDF, and the above content is for reference
TOOL HAND CRIMPERHand Crimper Tool
TOOL HAND CRIMPER 10-12AWG SIDEHand Crim...
TOOL HAND CRIMPER TOP ENTRYHand Crimper ...
TOOL HAND CRIMPER PHOTOVOLTAICHand Crimp...
TOOL HAND CRIMPER 14-18AWG SIDEHand Crim...
TOOL HAND CRIMPER COAX SIDEHand Crimper ...