2-641600-4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Sockets for ICs, transistors, and other semiconductors are a widely used and necessary component for circuit board assembly. 2-641600-4 is a common socket used for such components. The application field and working principle of this socket will be discussed in this article.

Application Field

2-641600-4 socket is mainly used for integrated circuits (ICs) and transistor components. It has an accommodating socket diameter of 24mm, a contact pin count of 64 and an IC or transistor pitch of 2.54mm. This makes them suitable for small integrated circuits and transistors. As for compatible plugs, all standard IC components and transistor plugs with the same or compatible leads as the socket should fit properly in the 2-641600-4 socket. The socket is also available with different pin counts such as 56, 68 or 72 pins.

2-641600-4 socket is commonly installed on printed circuit boards (PCBs) as part of the assembly process. This makes it easier to remove and replace the modules when needed. In addition, the socket has an insertion depth of 10mm, so it can accommodate a wide range of components.

Working Principle

2-641600-4 socket is designed to provide a secure electrical connection between the IC or transistor component and the PCB. This is done by means of a contact pin located in each of the socket’s 8 cavities. The contact pins are then connected to the PCB via circuit traces, allowing current to flow from one contact to another when the socket is installed.

The 2-641600-4 socket is designed to be highly reliable and resistant to wear. This is achieved by using high quality materials and a unique design. The contact pins are gold plated to reduce oxidation, andmicon springs ensure that each contact pin makes contact with the IC or transistor component.

In addition, 2-641600-4 socket has 10 anti-reverse winding bars to protect against reverse insertion. This helps to prevent incorrect installation or misalignment when installing the socket on a PCB. As a result, the socket provides a stable and secure connection, reducing the risk of shorts or other circuit failure.

Conclusion

2-641600-4 socket is a common socket used for connecting integrated circuits and transistors to a printed circuit board. It is designed with 24mm socket diameter, 64 contact pins, 2.54mm IC or transistor pitch, and an insertion depth of 10mm. The socket is made of high quality materials and has ten anti-reverse winding bars for secure installation. This ensures that the socket will provide a stable and reliable connection, allowing for a safe and efficient circuit board assembly.

The specific data is subject to PDF, and the above content is for reference