Allicdata Part #: | 20-50TPC-ND |
Manufacturer Part#: |
20-50TPC |
Price: | $ 8.25 |
Product Category: | RF/IF and RFID |
Manufacturer: | |
Short Description: | FLANGED TERMINATION THICK FILM 5 |
More Detail: | RF Attenuator 0Hz ~ 6GHz 50 Ohms 20W |
DataSheet: | 20-50TPC Datasheet/PDF |
Quantity: | 1000 |
50 +: | $ 7.49700 |
Series: | -- |
Packaging: | Tray |
Part Status: | Active |
Attenuation Value: | -- |
Frequency Range: | 0Hz ~ 6GHz |
Power (Watts): | 20W |
Impedance: | 50 Ohms |
Package / Case: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators, as part of electronic test equipment, perform an important role of lowering the strength of an electric signal without causing too much distortion. They are commonly used in a range of applications from audio and video production to telecommunication systems and RF signal research. The 20-50TPC application field and its associated working principle are among the most widely used technologies in communications.
The 20-50TPC application field is mainly focused on telecommunications applications involving frequency division multiplexing and broadcast applications. The 20-50TPC attenuator is a passive device made up of a power divider, directional coupler, hybrid network, and attenuator which is designed to provide very low distortion attenuation of a signal. The attenuator is usually composed of several circuits, each with its own specific characteristics. The primary purpose of this device is to reduce the power ratio by reducing the signal amplitude and frequency. This in turn leads to a reduction in overall distortion.
The working principle of the 20-50TPC attenuator is relatively straightforward and involves the following steps. First, a signal is received by the power divider. This device then splits the signal into two paths with the ratio determined by adjusting the power of the two paths. Next, the two signals are separated by the directional coupler to obtain two signal paths with opposite orientations. The next step involves feeding the signal through the hybrid network to combine the two signals so that they become in phase and thus produce the output signal. Finally, the attenuator is then used to reduce the amplitude of the signal.
The 20-50TPC application field is widely used in telecommunication systems, broadcast applications, and frequency division multiplexing. The major advantage of this technology is that it provides very low distortion at the output, thus allowing for a reliable transmission. It is also quite economical and requires very little maintenance. This makes it an ideal option for a variety of applications.
In conclusion, the 20-50TPC application field and its associated working principle are among the most widely used technologies in communications. It provides very low distortion, is economical, and requires very little maintenance. Furthermore, it is widely used in a variety of applications, making it an ideal choice for many.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...