20-CBSA-0.5X4.25X0.2

Series:	20-CBS
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.200" (5.08mm)
Length - Overall:	4.250" (107.95mm)
Width - Overall:	0.500" (12.70mm)
Ventilation:	Non-Vented
Mounting Type:	Surface Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

IntroductionRF Shields are an important technology at the heart of many electronic devices and systems. The shield, which is typically constructed out of metal with a conducting surface or layers of insulated metal foil, provides a barrier between the RF signals generated by electronic components and the environment. The shield prevents the signals from reaching sensitive areas, such as power control components, and helps to prevent interference with other signals in the area. By shielding sensitive components from the RF interference, RF Shields can improve the performance and reliability of the electronic device.The CBSA-0.5x4.25x0.2 RF Shield is a specialized metal shield that is typically used in radio frequency devices. The shield is specially designed to provide excellent shielding from RF interference, while also allowing for significant flexibility in its application. This article will discuss the application fields and the working principle of the CBSA-0.5x4.25x0.2 RF Shield.Application FieldsThe CBSA-0.5x4.25x0.2 RF Shield is typically used in devices that require significant signal shielding and RF protection. The shield is well-suited to be used in applications such as consumer electronics, medical devices, automotive Electronics, and laboratory instruments. The CBSA-0.5x4.25x0.2 is also widely used in defense applications, including designs that are used in radios, radar, and missile guidance systems.Design and Working PrincipleThe CBSA-0.5x4.25x0.2 RF Shield is made up of several components. The main components include the metal shielding, the printed circuit board, the electrical components, and the RF absorber material. The metal shielding is typically made from aluminum or steel, and is designed to provide a barrier between the sensitive components and the RF signals in the environment. The RF absorber material is typically made from special conductive foam, and is designed to absorb the RF signals and prevent them from entering the device.The shield is designed to work in conjunction with the internal components of the device. The electrical components, such as transistors and resistors, act as filters to further block RF interference from entering the device. The printed circuit board provides the pathways for the signals to be routed within the device. The RF absorber material is also designed to reduce the amount of signal that is reflected back into the device, which helps to reduce the amount of interference that the device experiences.ConclusionThe CBSA-0.5x4.25x0.2 RF Shield is an important technology for providing shielding against RF interference and signal protection for electronic devices. The shield is designed to be used in a wide variety of applications, from consumer electronics to defense applications. The shield is composed of several components, including the metal shielding, the printed circuit board, the electrical components, and the RF absorber material. The shield is designed to reduce the amount of signal that is reflected back into the device, and help protect the sensitive components from RF interference.

The specific data is subject to PDF, and the above content is for reference