20-CBSA-1.25X3.25X0.2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF shields are enclosures used to protect components from the damaging effects of electromagnetic radiation. The type of shields most commonly used is the ferrite core or sheet shield. These are typically made of two layers of ferrite, each separated by a conductive plate. This type of RF shield is designed to reduce the transmission of EMFs, both radiated and conducted, into and out of sensitive electronic equipment, which in turn extends the life of the equipment and reduces the risk of interference from outside sources. The 20-CBSA-1.25X3.25X0.2 shield is one type of RF shield used in a variety of different applications.

The 20-CBSA-1.25X3.25X0.2 shield is designed for use in high-frequency applications where a large amount of shielding is needed. The overall design consists of two plates of ferrite material separated by a conductive sheet in between them. The outside of the shield is covered in a metal casing, which helps ensure that the conductive sheet remains in place and shields the inside contents from any EMF interference. This design ensures that the critical components of the shielded electronic equipment are well protected.

The 20-CBSA-1.25X3.25X0.2 shield is designed to reduce the transmission of EMF radiation, both radiated and conducted. The outer metal casing of the shield helps further attenuate both types of interference. Additionally, as the frequency of the signal increases, the effectiveness of the shielded enclosure increases. By maintaining this increased frequency shielding, the components of the electronic equipment are kept safe from any outside interference, and the life of the equipment is extended.

This type of RF shield is commonly found in a variety of industrial and commercial applications, such as in medical imaging equipment, radar systems, and other high-frequency communication systems. Additionally, this type of RF shield is often used in consumer electronics such as cell phones and computer monitors, as the protection of the components is essential to the proper functioning of the device. Furthermore, this type of RF shield is increasingly being incorporated into satellite communication systems, where the protection of sensitive equipment is even more critical.

Overall, the 20-CBSA-1.25X3.25X0.2 RF shield is a highly effective means of protecting sensitive equipment and devices from outside interference. The dual layer construction, featuring two layers of ferrite separated by a conductive plate, ensures that the level of shielding is maintained at all frequencies, while the outer metal casing further reduces EMF radiation. This type of RF shield is widely used in a variety of industrial and commercial applications, as well as in consumer electronics, to protect sensitive components from interference.

The specific data is subject to PDF, and the above content is for reference