Allicdata Part #: | 20-CBSA-1.75X4.5X0.2-ND |
Manufacturer Part#: |
20-CBSA-1.75X4.5X0.2 |
Price: | $ 15.28 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 20 SERIES CBS SHIELD ASSEMBLY - |
More Detail: | RF Shield Shield, 2-Piece 1.750" (44.45mm) X 4.500... |
DataSheet: | 20-CBSA-1.75X4.5X0.2 Datasheet/PDF |
Quantity: | 1000 |
21 +: | $ 13.89270 |
Series: | 20-CBS |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.200" (5.08mm) |
Length - Overall: | 4.500" (114.30mm) |
Width - Overall: | 1.750" (44.45mm) |
Ventilation: | Non-Vented |
Mounting Type: | Surface Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF shields are a critical part of many electronic devices used in modern communication. They are designed to protect and ensure the functioning of a device by blocking out electromagnetic interference (EMI) from external sources, thereby restricting its reception of undesired signals. The shield also provides an audio reduction, thereby increasing the transmission of desired signals. One particular type of RF shield that is commonly used is the 20-CBSA-1.75X4.5X0.2.
This particular model is a versatile, high-strength, protective shield that is typically used as part of an electronics system. It is composed of two layers: an aluminium foil backing and a second layer of EMI-resistant material. The two layers are secured together with special adhesive, forming an effective barrier against external interference in the form of radio waves, cell phone signals, and other forms of EMI. The foil backing is also heat-resistant and prevents corrosion on the contact surfaces.
The 20-CBSA-1.75X4.5X0.2 RF shield is used in a variety of applications, from microwave systems to computers and various other electronic systems. In all applications, the shield is designed to provide a barrier against the interference caused by external sources. In addition, the EMI-resistant material protects the system from excessive heat, which can cause it to malfunction. In many cases, the shield is also used to reduce noise or other forms of distortion which can interfere with the functioning of the electronic device.
The primary working principle of RF shields is to prevent any undesired signals from reaching the device by blocking their transmission. The two layers of material act as an effective barrier against external interference. The foil backing also helps increase the shield’s effectiveness by providing a conductive path which allows any incoming or outgoing electromagnetic radiation to pass through. The two layers also serve to block out any physical contact which could damage or compromise the system in any way.
Utilizing RF shields is an essential part of the design process for any electronic device. Without the proper shielding, a device could experience interference from external sources, reducing its performance and reliability. By implementing a 20-CBSA-1.75X4.5X0.2 RF shield, the product can be confident that it will be protected from unwanted signals while also reducing the chances of malfunction from excessive heat.
In conclusion, the 20-CBSA-1.75X4.5X0.2 RF shield is a versatile and reliable solution for protecting any electronic device from external interference or heat damage. With its two-layer, EMI-resistant design and heat-resistant backing, it serves as an effective barrier against undesired signals while also providing increased protection for the system from environmental factors. That way, any device can be assured of its safety from various sources of possible damage, which ultimately allows it to perform optimally.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...