20-CBSA-2.5X5.5X0.2

Series:	20-CBS
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.200" (5.08mm)
Length - Overall:	5.500" (139.70mm)
Width - Overall:	2.500" (63.50mm)
Ventilation:	Non-Vented
Mounting Type:	Surface Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Shield refers to the shielding material used to isolate the RF signal from being disturbed by other incoming signals. It is an integral component of wireless communication systems as it prevents the attenuation of the signal and ensures its integrity. 20-CBSA-2.5X5.5X0.2 is a standard RF shield, providing an effective and reliable protection.In the field of radio frequency (RF) shield design, there are a number of parameters which must be taken into account. The 20-CBSA-2.5X5.5X0.2 is a shield designed to reduce the amount of incoming RF energy by providing a barrier between it and the environment. The shield consists of two shields that are interconnected and positioned perpendicularly. The first shield is made of copper, which is highly conductive and offers good signal attenuation. The second shield is an aluminum alloy, which provides a higher degree of reflection, making it more effective at cancelling out noise.The working principle of the 20-CBSA-2.5X5.5X0.2 shield can be explained as follows. The incoming RF energy is incident on the copper shield. The energy is then reflected back and attenuated by the copper shield, which absorbs some of the energy. This reflected energy then reaches the aluminum alloy shield where it is further attenuated by the reflective properties of the material. In this way, the incoming RF energy is further attenuated before reaching its destination.The performance of 20-CBSA-2.5X5.5X0.2 shields depends upon the frequency of the incoming signal. At high frequencies, the shield is highly effective at attenuating the incident signal and preventing it from reaching its destination. At lower frequencies, however, the efficiency of the shield decreases, as the aluminum alloy cannot effectively reproduce the same reflective properties as the copper shield. In this case, the shield can still offer some protection, but it will be less effective than when operating in the higher frequency range.The 20-CBSA-2.5X5.5X0.2 shield is most commonly used in applications where the transmission and reception of RF signals is of paramount importance, such as in the telecommunications industry, where the integrity of the signal is essential for proper transmission. The shielding capabilities of the 20-CBSA-2.5X5.5X0.2 are also beneficial for the manufacture of RF-enabled medical devices, as their functionality relies on the accuracy of the signals being transmitted. Additionally, the shield is also ideal for applications involving electronic RF-sensing and navigation, as the incoming signal must be accurately detected in order for the equipment to work properly.In conclusion, the 20-CBSA-2.5X5.5X0.2 is an important RF shield, providing effective RF signal attenuation and protection. It is an ideal choice in applications where the highest levels of precision and reliability is required, and it has numerous applications in the emerging field of RF communications. Its design ensures that it can provide high levels of attenuation and protection across a range of frequencies, and its reflective properties make it particularly suitable for use in the manufacturing of RF-enabled medical equipment. As such, it is an indispensable component of any wireless communication system.

The specific data is subject to PDF, and the above content is for reference