Allicdata Part #: | 20-CBSF-1.0X2.0X0.2-ND |
Manufacturer Part#: |
20-CBSF-1.0X2.0X0.2 |
Price: | $ 13.71 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 20-CBSF-1.0X2.0X0.2--20S420--CIR |
More Detail: | RF Shield Shield, 2-Piece 1.000" (25.40mm) X 2.000... |
DataSheet: | 20-CBSF-1.0X2.0X0.2 Datasheet/PDF |
Quantity: | 1000 |
40 +: | $ 12.45570 |
Series: | 20-CBS |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.200" (5.08mm) |
Length - Overall: | 2.000" (50.80mm) |
Width - Overall: | 1.000" (25.40mm) |
Ventilation: | Vent Holes in Pattern |
Mounting Type: | Surface Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The 20-CBSF-1.0X2.0X0.2 is used in a variety of shielded environments to provide electrical shielding and signal isolation. The 20-CBSF-1.0X2.0X0.2 is a radio frequency (RF) shield, designed to protect electronic components and communications systems from interference caused by nearby radio signals. The purpose of the 20-CBSF-1.0X2.0X0.2 is to contain and absorb emitted and incident radio waves.
The 20-CBSF-1.0X2.0X0.2 is made from several layers of materials, including a conductive metal layer, a non-conductive carrier layer, and an outer layer. The conductive metal layer is usually made of copper or aluminum and acts as a shield against strong RF signals from the outside. The non-conductive carrier layer is made of a high-density polyethylene (HDPE) material that supports the shielding of the metal layer. The outer layer is a tough but non-conductive material, such as nylon, that provides abrasion resistance against weather and other environmental factors.
The 20-CBSF-1.0X2.0X0.2 is designed to protect sensitive electronics from RF interference, provide attenuation, and improve signal integrity. It is typically installed in metal enclosures, as part of a wireless or wired communications system, in military, industrial, and commercial applications. In such applications, the 20-CBSF-1.0X2.0X0.2 functions as a Faraday cage, preventing electromagnetic radiation from entering or leaving the protected area. It also provides a dampening effect on RF interference within the area.
The 20-CBSF-1.0X2.0X0.2 is designed to reduce the amount of radio signals that can enter or exit a particular area, thus shielding the installed equipment or systems from interference. It is also used to attenuate unwanted harmonic signals generated by high-powered transmitters, thus increasing the accuracy and integrity of transmitted data. Additionally, the 20-CBSF-1.0X2.0X0.2 is used to protect circuitry from potentially damaging RF signals, resulting in improved system and component reliability.
The 20-CBSF-1.0X2.0X0.2 is a highly efficient, lightweight, and cost-effective radio frequency shield and Faraday cage designed for many commercial applications. Its high-density polyethylene (HDPE) carrier layer is designed to absorb strong incident radio waves, while its non-conductive outer layer guards against weather, dust, and other environmental factors. When installed correctly and combined with other effective shielding techniques, the 20-CBSF-1.0X2.0X0.2 can provide superior RF protection and prevent interference to critical systems.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...