Allicdata Part #: | 20-CBSF-1.5X1.75X0.25-ND |
Manufacturer Part#: |
20-CBSF-1.5X1.75X0.25 |
Price: | $ 9.37 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 20-CBSF-1.5X1.75X0.25--20S562--C |
More Detail: | RF Shield Shield, 2-Piece 1.500" (38.10mm) X 1.750... |
DataSheet: | 20-CBSF-1.5X1.75X0.25 Datasheet/PDF |
Quantity: | 1000 |
50 +: | $ 8.51984 |
Series: | 20-CBS |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.250" (6.35mm) |
Length - Overall: | 1.750" (44.45mm) |
Width - Overall: | 1.500" (38.10mm) |
Ventilation: | Vent Holes in Pattern |
Mounting Type: | Surface Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The 20-CBSF-1.5X1.75X0.25 is a type of RF (radio frequency) shield. It is an absorptive metal shield designed to protect electronic devices from radio interference. It is characterized by its small size, wide frequency coverage, high performance, and fast assembly. The 20-CBSF is composed of two thin foils of copper that are connected together with an adhesive that is specially formulated to reduce EMI (electromagnetic interference).
RF shields are used in a wide range of applications including medical applications, satellite communications, avionics, oscilloscopes, automotive electronics, electromagnetic compatibility (EMC), and handheld devices. In medical applications, the 20-CBSF shield is often used for medical imaging equipment, such as MRI scanners, due to its high performance and EMI resistance. Satellite communications utilize the 20-CBSF for satellite link isolation and peak-to-peak noise isolation. Avionics, oscilloscopes, and other electronic devices use the 20-CBSF for signal integrity, voltage isolation, and EMC protection.
The 20-CBSF-1.5X1.75X0.25 shield works on the principle of absorption. The two thin foils of copper absorb radio frequency radiation and prevent it from entering the protected area. These foils are then connected together with a conductive adhesive to form an effective shield.
The 20-CBSF-1.5X1.75X0.25 shield is available in different configurations such as standard, angled and low profile. The standard configuration uses two thin foils of copper connected with conductive adhesive. The angled configuration adds an extra layer of insulation to the shield that redirects the radio frequency radiation away from the device. The low profile option is the most efficient configuration, as it adds a layer of insulation on top of the two foils that further redirects the RF radiation away from the device.
The 20-CBSF-1.5X1.75X0.25 RF shield is used to protect a wide range of electronic devices from radio interference. The shield works on the principle of absorption and is available in a variety of configurations. It utilizes two thin foils of copper and a specially formulated adhesive to absorb RF radiation and protect the device from EMI. This shield is ideal for medical imaging, satellite communications, avionics, oscilloscopes, electromagnetic compatibility, and handheld devices.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...